Lexmark XM1100 Series manual Installing a memory card, Close the shield, and then the access door

Additional printer setup 28

4 3

1 Memory card connector

2Option card connector

3Printer hard disk connector

4 Lexmark Internal Solutions Port connector

4Close the shield, and then the access door.

1

21

2

Installing a memory card

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

Warning—Potential Damage: Controller board electronic components are easily damaged by static electricity. Touch something metal on the printer before touching any controller board electronic components or connectors.

Note: An optional memory card can be purchased separately and attached to the controller board.

1Access the controller board.

For more information, see “Accessing the controller board” on page 27.

2Unpack the memory card.

Warning—Potential Damage: Do not touch the connection points along the edge of the card. Doing so may cause damage.