Lexmark XM1100 Series manual Understanding the printer menus 164, Hibernate Timeout on Connection

Understanding the printer menus		164
	Use	To
	Timeouts	Set the amount of time in minutes the printer waits after a job is
	Sleep Mode	printed before it goes into a reduced power state.
	Disabled	Notes:
	1–120	• 30 is the factory default setting.
		• Disabled appears only when Energy Conserve is set to Off.
		• Lower settings conserve more energy, but may require
		longer warm‑up times.
		• Select a high setting if the printer is in constant use. Under
		most circumstances, this keeps the printer ready to print
		with minimum warm‑up time.
	Timeouts	Set the amount of time the printer waits before it goes to Hibernate
	Timeout	mode.
	Disabled	Notes:
	1 hour	• Disabled is the factory default setting for printers except in
	2 hours
		European Union countries and Switzerland.
	3 hours
		• “3 days” is the factory default setting for Class B printers in
	6 hours
		European Union countries and Switzerland.
	1 day
	2 days
	3 days
	1 week
	2 weeks
	1 month
	Hibernate Timeout on Connection	Set the printer to hibernate mode even when there is an active
	Hibernate	Ethernet or fax connection.
	Do Not Hibernate	Notes:
		• Do Not Hibernate is the factory default setting.
		• The fax function is available only in select printer models.
	Timeouts	Set the amount of time in seconds the printer waits before
	Screen Timeout	returning the display to the Ready state.
	15–300	Note: 30 is the factory default setting.
	Timeouts	Show a message that lets you reset the screen timeout timer
	Prolong Screen Timeout	instead of returning to the home screen.
	On	Note: Off is the factory default setting.
	Off