6.Click the Submit button.
The changes take effect immediately.
Clearing an Orphan Watermark
An Orphan Watermark condition is the result of a disk drive failure during an NVRAM RAID level migration on a disk array.
To clear an Orphan Watermark:
1.Click the Subsystem 
icon in Tree View.
2.Click the Controllers 
icon.
3.Click the Controller 
icon.
4.Click on the Clear tab in Management View.
5.Click the Submit button.
The changes take effect immediately. If your subsystem has two controllers, clearing a condition on one controller will automatically apply to the other controller.
Managing Enclosures
On Astra ES, enclosures include the main Astra ES subsystem or RAID Head Unit as well as additional JBOD enclosures that are connected to it through cascading or expansion. Enclosure Management includes the following functions:
•Viewing the Enclosure
•Locating the Enclosure
•Viewing Enclosure Topology
•Modifying Enclosure Settings
•Viewing FRU Information
•Checking and Managing the Battery
•Managing the audible Buzzer
Viewing the Enclosures
To view information about the enclosures:
1.Click the Subsystem 
icon in Tree View.
2.Click the Enclosures 
icon.
The following information is shown:
•Enclosure ID number
•Enclosure Type
•Operational Status
•Status Description – Specific components in need of attention, if any
Locating an Enclosure
To locate an enclosure (subsystem):
1.Click the Subsystem 
icon in Tree View.
2.Click the Enclosures 
icon.
3.Click the Locate Enclosure button.
The Disk Status LEDs on the front of the enclosure will flash for one minute. See the illustrations below.
Viewing Enclosure Topology
To view Enclosure Topology:
SECURSTOR ASTRA ES | 51 |
