2.Gently press the handle in and upward until it locks.

3.Connect the Fibre Channel or SAS cables, management, serial, and power cables.

Single Controller Subsystem

Removing the old controller

To remove the RAID Controller on a single-controller subsystem:

2.Shutdown the Astra ES via the GUI.

2.Switch off the power after waiting two minutes.

3.Disconnect the Fibre Channel or SAS cables, management, serial and power cables.

4.On the controller handle, press the release button and pull the handle downward.

5.Pull the controller out of the Astra ES enclosure.

Installing the new controller

To install the new controller:

1.Carefully slide the controller into the enclosure.

3.Gently press the handle in and upward until it locks.

3.Connect the Fibre Channel or SAS cables, management, serial and power cables.

4.Switch on the power. The Astra ES will restart.

Figure 20: Replacing Astra ES controller

SECURSTOR ASTRA ES

79

Page 79
Image 79
Meridian Data 1 manual Single Controller Subsystem, Replacing Astra ES controller