9.Click the Refresh button in your Browser.

The drives appear in their new locations and disk array status displays OK.

Managing Logical Drives

Logical drives are made from disk arrays. In the Tree, you can see a graphic representation of the logical drives that belong to each array. You can see a summary of all logical drives in the subsystem under Logical Drive Summary.

Logical drive management includes the following functions:

Viewing Logical Drive Information

Viewing Logical Drive Statistics

Managing Local Drive Settings

Initializing a Logical Drive

Running a Redundancy Check

Viewing the Logical Drive Check Table

Managing LUN Mappings for the Logical Drive

Viewing Information for All Logical Drives

To view information about all logical drives in a disk array:

1.Click the Subsystem icon in Tree View.

2.Click the Disk Arrays icon.

3.Click the Disk Array icon.

4.Click the Logical Drives icon

Logical Drive Status

OK – This is the normal state of a logical drive. When a logical drive is Functional, it is ready for immediate use. For RAID Levels other than RAID 0 (Striping), the logical drive has full redundancy.

Synchronizing – This condition is temporary. Synchronizing is a maintenance function that verifies the integrity of data and redundancy in the logical drive. When a logical drive is Synchronizing, it will function and your data is available. However, access will be slower due to the synchronizing operation.

Rebuilding – This condition is temporary. When a physical drive has been replaced, the logical drive automatically begins rebuilding in order to restore redundancy (fault tolerance). When a logical drive is rebuilding, it will function and your data is available. However, access will be slower due to the rebuilding operation.

Critical – This condition arises as the result of a physical drive failure. A degraded logical drive will still function and your data is still available. However, the logical drive has lost redundancy (fault tolerance). You must determine the cause of the problem and correct it.

Offline – This condition arises as the result of a second physical drive failure. An Offline logical drive is not accessible but some or all of your data may remain intact. You must determine the cause of the problem and correct it.

Transport Ready – After you perform a successful Prepare for Transport operation, this condition means you can remove the physical drives of this disk array and move them to another enclosure or different drive slots. After you relocate the physical drives, the disk array status will show OK.

Viewing Logical Drive Information

To view information for a single logical drive:

1.Click the Subsystem icon in Tree View.

2.Click the Disk Arrays icon.

3.Click the Disk Array icon.

SECURSTOR ASTRA ES

65

Page 65
Image 65
Meridian Data 1 Managing Logical Drives, Viewing Information for All Logical Drives, Viewing Logical Drive Information