Mitsubishi Electronics manual 148

11 TROUBLESHOOTING

MELSEC-Q

	Error Code		Error Contents and Cause	Corrective Action	Corres-
					ponding
	(SD0)	1
					CPU
			The refresh setting of the intelligent function module exceeded the	Change the file register file for the one which allows refresh in the	QCPU
					function
3301			file register capacity.	whole range.	Ver. B
					or later
			The intelligent function module's refresh parameter setting is	Check the parameter setting.	QCPU
			outside the available range.		Rem
3302			The intelligent function module's refresh parameter are abnormal.	Check the parameter setting.	QCPU
				(1) Delete the automatic refresh setting or similar parameter setting
			In a multiple CPU system, automatic refresh setting or similar	of the intelligent function module under control of another
				station.
3303			parameter setting was made to the intelligent function module under
				(2) Change the setting to the automatic refresh setting or similar
			control of another station.	parameter setting of the intelligent function module under control
				of the host station.
3400			The first I/O number of the target module in the remote password	Change the first I/O number of the target module to within the 0H to
			file is set to other than 0H to 0FF0H.	0FF0H range.
					QCPU
			Position specified as the first I/O number of the remote password
			file is incorrect due to one of the following reasons:		function
			• Module is not loaded.	Load the QJ71C24(-R2) or Q series Ethernet interface module of	Ver. B
			• Other than a Q-compatible intelligent function module (I/O, A, QnA		or later
			module)	function version B in the position specified as the first I/O number of
3401			• Intelligent function module other than QJ71C24(-R2) or Q series	the remote password file.
			Ethernet interface module

•QJ71C24(-R2) or Q series Ethernet interface module of function version A

		QJ71C24(-R2) or Q series Ethernet interface module of function	(1) Change the setting to the QJ71C24(-R2) or Q series Ethernet
			interface module of function version B under control of the host
		version B under control of another station is specified in a multiple
			station.
		CPU system.
			(2) Delete the remote password setting.
4000		The program contains an instruction code that cannot be decoded.
		An unusable instruction is included in the program.
			Read the common error information at a peripheral device, check
4001		The program contains a dedicated instruction for SFC program
		although it is not an SFC program.	error step corresponding to its numerical value (program error
			location), and correct the problem.
4002		The extension instruction designated by the program has an
		incorrect instruction name.
				Rem
4003		The extension instruction designated by the program has an
		incorrect number of devices.
4004		The extension instruction designated by the program a device which	Read the common error information at a peripheral device, check
			error step corresponding to its numerical value (program error
		cannot be used.	location), and correct the problem.
	4010	There is no END (FEND) instruction in the program.
	4020	The total number of internal file pointers used by the program	Read the common error information at a peripheral device, check
		exceeds the number of internal file pointers set in the parameters.
	4021	The common pointer numbers used by individual files overlap.	error step corresponding to its numerical value (program error
			location), and correct the problem.
	4030	The allocation pointer numbers used by individual files are overlap.
	4100	The instruction cannot process the contained data.	Read the common error information at a peripheral device, check
		The designated device number for data processed by the instruction
	4101	exceeds the usable range.	error step corresponding to its numerical value (program error
		Alternatively, the stored data or constants for the devices	location), and correct the problem.
		designated by the instruction exceeds the usable range.
		In a multiple CPU system, the link direct device (J \G ) was	(1) Delete from the program the link direct device which specifies	QCPU
			the network module under control of another station.	function
		specified for the network module under control of another station.	(2) Using the link direct device, specify the network module under	Ver. B
			control of the host station.	or later
	4102	The network number and station number designated with a
		dedicated network instruction are not correct.
		The link direct device (J \W ) is not set correctly.	Read the common error information at a peripheral device, check
		• The module No./network No./character string count specified by		Rem
			error step corresponding to its numerical value (program error
		the extension instruction is outside the setting range.
			location), and correct the problem.
		• The character string (" ") specified by the extension instruction is
		unusable.
	4103	The configuration of the PID dedicated instruction is incorrect.
		33 or more multiple CPU dedicated instructions were executed from	Using the multiple CPU dedicated instruction completion bit, provide	QCPU
				function
			interlocks to prevent one CPU module from executing 32 or more
		one CPU module.		Ver. B
	4107		multiple CPU dedicated instructions.
				or later
		Numbers of execution to the CC-Link instruction are beyond 64.	Set the numbers of execution to the CC-Link instruction to 64 or
			less.	QnA
	4108	The CC-Link parameter is not set when the CC-Link instruction is	Execute the CC-Link instruction after setting the CC-Link
		executed.	parameter.
		With high speed interrupt setting execute	Read the common error information at a peripheral device, check	QCPU
	4109			serial
		PR/PRC,UDCNT1/2,PWM,SPD,PLOADP,PUNLOADP,PAWPP	error step corresponding to its numerical value (program error	No.
		instruction.	location), and correct the problem.	04012
				or later
		No NEXT instruction was executed following the execution of a	Read the common error information at a peripheral device, check
		FOR instruction.
	4200		error step corresponding to its numerical value (program error
		Alternatively, there are fewer NEXT instructions than FOR	location), and correct the problem.
		instructions.
		A NEXT instruction was executed although no FOR instruction has	Read the common error information at a peripheral device, check
		been executed.
	4201		error step corresponding to its numerical value (program error
		Alternatively, there are more NEXT instructions than FOR
			location), and correct the problem.
		instructions.

1 Characters in parentheses ( ) indicate the special register numbers where individual information is being stored.

11 - 32 11 - 32