9LOADING AND INSTALLATION

(b)Removal from Q3B, Q5B and Q6B

MELSEC-Q

Hold the module with both hands, and push the unit fixing hook on the top of the module with a finger until it stops.

While pushing the unit fixing hook, and using the bottom of the module as a support, pull the module toward you.

Lift the module upwards and remove the module fixing latch from the module fixing hole.

Base unit

Module

connector

Module

Module fixing hole

Completion

POINT

When the module fixing screw is used, always remove the module by removing the module fixing screw and then taking the module fixing latch off the module fixing hole of the base unit.

Do not try to remove the module forcibly since this may damage the module.

9 - 16

9 - 16