APPENDICES |
|
| |||
|
|
|
| ||
|
|
|
|
| |
Error code | Error | Error description | Countermeasure | ||
(hexadecimal) | item | ||||
|
|
| |||
40A0H |
| A block No. outside the range was specified. | Check the setting contents and make a correction. | ||
40A1H |
| A number of blocks that exceeds the range was | Check the number of settings and make a correction. | ||
|
| specified. |
|
| |
40A2H |
| A step No. that is outside the range was | Check the setting contents and make a correction. | ||
SFC device | specified. | ||||
|
|
| |||
| A number of steps that exceeds the range was |
|
| ||
40A3H | specification | Check the number of settings and make a correction. | |||
| error | specified. |
|
| |
40A4H | A sequence step No. outside the range was | Check the setting contents and make a correction. | |||
| |||||
| specified. | ||||
|
|
|
| ||
40A5H |
| The specified device was outside the range. | Check the number of settings and make a correction. | ||
40A6H |
| There is a mistake in the block specification | Check the setting contents and make a correction. | ||
| pattern or the step specification pattern. | ||||
|
|
|
| ||
40B0H |
| The wrong drive was specified. | Check the setting contents and make a correction. | ||
40B1H | SFC file related | The specified program does not exist. | Check the specified file name and make a correction. | ||
40B2H | The specified program was not an SFC | Check the specified file name and make a correction. | |||
error | program. | ||||
|
|
| |||
40B3H |
| There was an SFC dedicated instruction in the | Check the setting contents and make a correction. | ||
| write during run area. | ||||
|
|
|
| ||
|
|
| Increase the free space of the specified drive. | ||
41D0H |
| The route directory has no free space. | Optimize the specified drive to increase continuous free | ||
|
|
| areas. | ||
41D1H |
| The file pointer is insufficient. | Specify the correct file pointer. | ||
41D5H |
| The file of the same name exists. | Change the file name. | ||
41DFH |
| The disk is | Cancel the write protection of the disk and execute | ||
| again. | ||||
|
|
| |||
41E0H |
| The drive does not respond. | Check for the specified drive. If it exists, check its status. | ||
41E1H |
| The address or sector is not found. | Check if the target is a ROM drive or not. | ||
41E4H |
| The file cannot be accessed properly. | Execute again after resetting the CPU module. | ||
41E8H |
| The drive format information is illegal. | Format the target drive. | ||
41E9H |
| At the time of file access, | Execute again after some time. | ||
during waiting for access. | |||||
|
|
| |||
| errors |
|
| ||
41EBH | The path name is too long. | Check the length of the path name. | |||
41ECH |
| The disk is logically broken. | Change the specified drive. | ||
|
| An attempt to make a file continuous failed. | Optimize the specified drive to increase continuous free | ||
41EDH |
| (There are enough free file areas, which cannot | |||
| areas. | ||||
|
| ||||
|
| be taken continuously.) |
|
| |
41F2H |
| The specified drive is ROM. | Check the specified drive. (Format it for RAM.) | ||
41FBH |
| The same starting source has already opened | Check if it is being processed by another application. | ||
| the specified file. | ||||
|
|
|
| ||
41FCH |
| An attempt was made to erase the mounted | Execute again after dismounting the drive. | ||
| drive. | ||||
|
|
|
| ||
41FDH |
| The Flash ROM is not formatted. | Erase the specified drive. | ||
41FEH |
| The memory card is not inserted. | Insert or reinsert the memory card. | ||
41FFH |
| The memory card type differs. | Check the memory card type. | ||
|
| (1) The specified station could not be accessed | (1) Set the routing parameter for accessing the specified | ||
|
| because a routing parameter was not set in | |||
4A00H |
| the related station. | station in the related station. | ||
| (2) Though routing via the multiple CPU system | (2) Try after a while. Or check if the system relaying the | |||
|
| ||||
| Link related | is attempted, the control CPU of the network | data is active, then start communication. | ||
| error | module that relays the data is not active. |
|
| |
4A01H |
| The network with the No. set in the routing | Check the routing parameter set in the related station | ||
| parameter does not exist. | and make a correction. | |||
|
| ||||
4A02H |
| Cannot access the specified station. | Check if an error has occurred in the network module | ||
| and if the module is offline. | ||||
|
|
| |||
4B00H | Object related | An error occurred in the access destination or in | Check if an error has occurred in the specified access | ||
error | a relay station. | destination or in a relay station to the access station and | |||
| if so take countermeasures. | ||||
|
|
| |||
App - 6 |
|
|
| App - 6 | |