9 LOADING AND INSTALLATION
9.3.2 Instructions for mounting the base unit
When mounting the PLC to an enclosure or similar, fully consider its operability, maintainability and environmental resistance.
(1) Module mounting position
For enhanced ventilation and ease of module replacement, leave the following clearances between the module top/bottom and structure/parts.
(a) In case of main base unit or extension base unit
Indicates the panel top, wiring duct or any part position.
30mm (1.18 inch) 
or more 
1
Panel
30mm (1.18 inch) 
or more
PLC
Door
20mm
(0.79 inch) or more
3
5mm (0.20 inch) or more 2 | 5mm (0.20 inch) or more |
1 : For wiring duct with 50mm (1.97 inch) or less height. 40mm (1.58 inch) or more for other cases.
2 : 20mm (0.79 inch) or more when the adjacent module is not removed and the extension cable is connected.
3 : 80mm (3.15 inch) or more for the connector type.
9 - 12 | 9 - 12 |