11TROUBLESHOOTING
11.7 Special Register List
The special registers, SD, are internal registers with fixed applications in the PLC.
For this reason, it is not possible to use these registers in sequence programs in the same way that normal registers are used.
However, data can be written as needed in order to control the CPU modules and remote I/O modules.
Data stored in the special registers are stored as BIN values if no special designation has been made to the contrary.
The headings in the table that follows have the following meanings.
Item | Function of Item |
|
| |
Number | • Indicates special register number |
| ||
Name | • Indicates name of special register |
| ||
Meaning | • Indicates contents of special register |
| ||
Explanation | • Discusses contents of special register in more detail |
| ||
| • Indicates whether the relay is set by the system or user, and, if it is set by the system, when | |||
| setting is performed. |
|
| |
| <Set by> |
|
| |
| S | : Set by system |
|
|
| U | : Set by user (sequence programs or test operations from GX Developer) | ||
| S/U | : Set by both system and user |
| |
| <When set> |
|
| |
Set by (When set) | Indicated only for registers set by system |
| ||
| Each END | : Set during each END processing |
| |
| Initial |
| : Set only during initial processing (when power supply is turned | |
|
|
| ON, or when going from STOP to RUN) | |
| Status change | : Set only when there is a change in status | ||
| Error |
| : Set when error occurs |
|
| Instruction execution | : Set when instruction is executed |
| |
| Request | : Set only when there is a user request (through SM, etc.) | ||
Corresponding ACPU | • Indicates corresponding special register in ACPU (D9 | )(Change and notation when | ||
there has been a change in contents) |
| |||
D9 | • Items indicated as "New" have been newly added for High Performance model | |||
| QCPU/QnACPU |
|
| |
| • Indicates the corresponding CPU module type name. |
| ||
| +Rem: Can be applied to all CPU module types and MELSECNET/H remote I/O modules. | |||
| : Can be applied to all types of CPU module |
| ||
Corresponding CPU | QCPU: Can be applied to High Performance model QCPU. |
| ||
QnA: Can be applied to QnA series and Q2ASCPU series |
| |||
|
| |||
| Remote: Can be applied to the MELSECNET/H remote I/O modules. | |||
| Each CPU type name: Can be applied only to the specific CPU module. (e.g. Q4ARCPU, | |||
| Q3ACPU) |
|
| |
For details on the following items, refer to the following manuals:
• Networks 
• For Q Corresponding MELSECNET/H Network System Reference Manual (PLC to PLC network)
•For Q Corresponding MELSECNET/H Network System Reference Manual (Remote I/O network)
•For QnA/Q4AR MELSECNET/10 Network System Reference Manual
• SFC | QCPU(Q mode)/QnACPU Programming Manual (SFC) |
POINT
(1)SD1200 to SD1255 are used for QnACPU. These relays are vacant with QCPU.
(2)Special register SD1500 and later are dedicated for Q4ARCPU.
11 - 64 | 11 - 64 |