APPENDICES
APPENDICES
APPENDIX 1 Special relays/Special registers
APPENDIX 1.1 Special relays
Special relays are internal relays whose applications are fixed in the Motion CPU. For this reason, they cannot be used in the same way as the normal internal relays by the Motion SFC programs.
However, they can be turned ON/OFF as needed in order to control the Motion CPU.
The headings in the table that follows have the following meanings.
Item |
| Explanation |
|
| |
No. | • Indicates the device No. of the special relay. |
|
|
| |
Name | • Indicates the name of the special relay. |
|
|
| |
Meaning | • Indicates the nature of the special relay. |
|
|
| |
Details | • Indicates detailed information about the nature of the special relay. |
|
|
| |
| • Indicates whether the relay is set by the system or user, and, if it is set by system, when |
|
|
| |
|
| APP. | |||
| setting is performed. |
|
| ||
| <Set by> |
|
|
|
|
| S: Set by system (Motion CPU) |
|
| ||
| U: Set by user (Motion SFC program or test operation using MT Developer) |
|
| ||
| S/U: Set by both system (Motion CPU) and user |
|
| ||
Set by | <When set> | Indicated only if setting is done by system (Motion CPU). |
|
| |
(When set) | Main process: Set during each main processing (free time processing of the CPU) |
|
| ||
| Initial process: Set only during initial processing (when power supply is turned ON, or |
|
| ||
|
| when executed the reset) |
|
| |
| Status change : Set only when there is a change in status |
|
| ||
| Error : Set when error is occurred. |
|
| ||
| Request : Set only when there is a user request (Special relay, etc.) |
|
| ||
| Operation cycle : Set during each operation cycle of the Motion CPU. |
|
| ||
|
|
|
|
|
|
APP - 1