CAUTION
The Motion controller, servo amplifier and servomotor are precision machines, so do not drop or apply strong impacts on them.
Securely fix the Motion controller, servo amplifier and servomotor to the machine according to the instruction manual. If the fixing is insufficient, these may come off during operation.
Always install the servomotor with reduction gears in the designated direction. Failing to do so may lead to oil leaks.
Store and use the unit in the following environmental conditions.
Environment | Conditions |
| ||
|
|
| ||
Motion controller/Servo amplifier |
| Servomotor | ||
|
| |||
Ambient | According to each instruction manual. |
| 0°C to +40°C (With no freezing) | |
temperature |
| (32°F to +104°F) | ||
|
| |||
Ambient humidity | According to each instruction manual. |
| 80% RH or less | |
| (With no dew condensation) | |||
|
|
| ||
Storage | According to each instruction manual. |
| ||
temperature |
| |||
|
| |||
Atmosphere | Indoors (where not subject to direct sunlight). | |||
No corrosive gases, flammable gases, oil mist or dust must exist | ||||
| ||||
Altitude | 1000m (3280.84ft.) or less above sea level | |||
Vibration | According to each instruction manual | |||
When coupling with the synchronous encoder or servomotor shaft end, do not apply impact such as by hitting with a hammer. Doing so may lead to detector damage.
Do not apply a load larger than the tolerable load onto the synchronous encoder and servomotor shaft. Doing so may lead to shaft breakage.
When not using the module for a long time, disconnect the power line from the Motion controller or servo amplifier.
Place the Motion controller and servo amplifier in static electricity preventing vinyl bags and store. 
When storing for a long time, please contact with our sales representative.
Also, execute a trial operation.
A - 6