Motorola T280i manual Changing a CODE, PIN, or Password, This is a Display Dependent Setup

CHANGING A CODE, PIN, OR PASSWORD

Your phone's four-digit unlock code is originally set to 1234, and the six-digit security code is originally set to 000000 at the factory. Your service provider may reset these numbers before you receive your phone.

If your service provider has not reset these numbers, we recommend that you change them to prevent other users from accessing your personal information. The unlock code must contain four digits, and the security code must contain six digits.

You can also reset your SIM card PIN code, PIN2 code, and/or call barring password if necessary. ###143 NOTES:

--THIS IS A DISPLAY DEPENDENT SETUP. *

*See information below on reaching the New Passwords

feature.

--Your service provider may retain your phone's security code for customer service purposes. In this case, you will not be able to use phone features that require you to enter the security code.

--If the unlock code is the only code you can change, the New Passwords menu is not available. In this case, open the unlock code editor by scrolling the path as follows.

Find the Feature:

Scroll menu path as follows--MENU, SETTINGS: Security; Phone Lock; UNLOCK CODE.

To change a code or password:

Find the Feature:

1.Press MENU, press 4-Way UP twice: SETTINGS. Press Right soft key to select.

2.Press 4-Way UP three * times: SECURITY. Press Right soft key to select.

* If your model does not have the Ring/Vibrate feature, omit one key press in this step.

3.Press 4-Way UP once: New Passwords. Press Right soft key to select.

4.The first option offered is Unlock Code. Press Right soft key to select,

OR,

Press Right soft key to select one of the following options: --Press 4-Way Down once: Security Code

--Press 4-Way Down twice: SIM PIN2

--Press 4-Way UP once: Bar Password

5.For any option above, press keypad keys to enter your old

code.

NOTE: For Bar Password, you will need to enter your old barring password. This may not be the same as your regular password.

6.Press Right soft key (OK) to submit your old code.

7.Press keypad keys to enter the new code.

8.Press Right soft key (OK) to assign the new code.

9.Press keypad keys to re-enter the new code.

10.Press Right soft key (OK) to confirm the new code. ###144

IF YOU FORGET A CODE, PIN, OR PASSWORD