Chapter 5 Preparation — Mounting and adjusting the lens

Indicated Compatible Lens Part No. on Camera

Indicated Compatible Lens Part No. on Camera

HA16X 6.3BERM-M58

HA16x 6.3BERM-M58

HA22X 7.8BERM-M58

HA22x 7.8BERM-M58

HJ17EX 7.6B IASE

HJ17ex 7.6B IASE

HJ22EX 7.6B IASE

HJ22ex 7.6B IASE

@@NOTE

tt For details on additions and modifications to lenses compatible with the chromatic aberration compensation function, visit the support desk at the following website:

http://pro-av.panasonic.net/

Operation of chromatic aberration compensation function

Operate by the following procedure when lens data is already stored on the camera.

1Mount the lens on the camera, and connect the lens connector to the camera.

2 Set [ON] in the main menu → [MAINTENANCE] → [CAC ADJ] → [CAC CONTROL].

If the lens model number stored on the camera matches the model number of the connected lens match, the chromatic aberration data stored on the camera will automatically be read.

Viewing the operation status of chromatic aberration compensation function

1Push the <MARKER SEL>/<MODE CHECK/MENU CANCEL> switch towards the <MCK/MCL> side with the menu not displayed in the viewfinder screen.

If the letters [CAC] are displayed at the top right of the viewfinder screen, the chromatic aberration compensation function is in operation. If the letters [CAC] are not displayed, the chromatic aberration compensation function is not in operation.

2 Set [ON] in the main menu → [VF] → [VF INDICATOR] → [CAC].

The letters [CAC] are displayed at the top right of the viewfinder screen. [ON] is set in the factory settings.

Loading the chromatic aberration compensation file from the SD memory card

Fig. 1

Fig. 2

1Insert the SD memory card written with the chromatic aberration compensation data you downloaded from out website into the camera.

For details on downloading, refer to the following website. http://pro-av.panasonic.net/

2 Select [LOAD] from the main menu → [FILE] → [CAC FILE (SD CARD)]. (Fig. 1)

The list of CAC files on the SD memory card is displayed.

3Select the file number to load, and press the jog dial button (or <SET> button). (Fig. 2) The confirmation screen is displayed.

4Select [YES], and press the jog dial button (or <SET> button). The list of CAC files saved in camera memory is displayed.

5Select the file number to save, and press the jog dial button (or <SET> button). The confirmation screen is displayed.

6 Select [YES], and press the jog dial button (or <SET> button).

The CAC files are loaded to camera memory.

7To store two or more chromatic aberration compensation data to the camera, repeat steps 2 to 6.

8To end menu operations, press the <MENU> button.

The setting menu disappears, and the camera status display is returned to.

– 100 –