Chapter 6 Thumbnail Operations for
Multiple thumbnails can be randomly selected on the thumbnail screen.
a b c d e
a:<THUMBNAIL> button
b:<EXIT> button
c:awsq cursor buttons r<SET> button
d:<MENU> button
e:<SHIFT> button
Selecting clips
You can select multiple clips randomly.
1Use the cursor buttons to move the cursor over the desired clip.
2 Press the <SET> button.
A light blue frame and [
] are displayed on the clip where the cursor is put. This indicates that it is selected.
3To select additional clips, repeat steps 1 to 2.
It is possible to display only the selected clips on the thumbnail screen for playback.
@@NOTE
tt While holding down the <SHIFT> button, use the cursor buttons (`/{) to move the cursor to the first or last clip.
tt After selecting a clip, move the cursor to another clip and press the <SHIFT> button + <SET> button to select all clips from the previously selected clip to the cursor position.
tt As clips are selected, the number of selected clips displayed on the lower right corner of the screen changes according to the selection.
Deselecting clips
1Move the cursor to the selected clip and press the <SET> button. This deselects the clip.
@@NOTE
tt While holding down the <SHIFT> button, press the <EXIT> button to deselect all the clips at once.