Chapter 7 Menu Operations — Menu list

[109%]

[ZEBRA2]

[ON] [OFF] [SPOT]

[ZEBRA2 DETECT]

[ZEBRA1 DETECT]

[0%]

[VF MARKER]

Item

 

Description of settings

Remark

[TABLE]

Selects the setting table of the marker select function. Check or set the details of

 

 

[A]/[B] at subsequent settings.

 

 

[A], [B]

 

 

 

 

 

 

[CENTER MARK]

Controls the center mark.

 

 

[1]

+ (large)

 

 

[2]

Open center (large)

 

 

[3]

+ (small)

 

 

[4]

Open center (small)

 

 

[OFF]

Does not display.

 

[SAFETY MARK]

Selects the type of frame for the safety zone marker.

 

 

[1]

Box

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[2]

Corners

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[OFF]

Does not display.

 

[SAFETY AREA]

Sets the size of the safety zone marker.

 

 

The constant ratio of length to width can be set in 1% increments.

 

 

[80%]…[90%]…[100%]

 

[FRAME MARK]

Selects frame marker [ON]/[OFF].

 

 

[ON], [OFF]

 

 

 

 

 

 

[FRAME SIG]

Sets frame marker aspect ratio.

 

 

The [VISTA] is 16:8,65 (1,85:1), and [CNSCO] is 16:6,81 (2,35:1).

 

 

[4:3], [13:9], [14:9], [VISTA], [CNSCO]

 

[FRAME LVL]

Sets the level of the outside of the frame marker.

 

 

[0]

Equivalent to signal off (blanking status).

 

 

[1]…[14]

Higher numbers indicate increased brightness.

 

 

[15]

Same brightness as center.

 

are factory settings.

[VF USER BOX]

The user box can be displayed as a box-type cursor in any position.

Item

Description of settings

Remark

[USER BOX]

Sets whether to display the user box in the viewfinder.

 

 

 

 

[ON], [OFF]

 

 

 

[USER BOX WIDTH]

Sets the width of the user box.

 

 

 

 

[1]…[13]…[100]

 

 

 

[USER BOX HEIGHT]

Sets the height of the user box.

 

 

 

 

[1]…[13]…[100]

 

 

 

[USER BOX H POS]

Sets the horizontal position of the center of the user box.

 

 

 

 

[50]…[0]…[50]

 

 

 

[USER BOX V POS]

Sets the vertical position of the center of the user box.

 

 

 

 

[50]…[0]…[50]

 

 

 

 

 

 

 

are factory settings.

– 144 –