Chapter 2 Description of
12 13
20 | 21 | 22 | 23 | 25 |
|
| 24 |
| 26 |
|
|
| 27 | |
|
|
|
| |
|
|
|
| 28 |
14 | 15 | 16 |
|
|
11 |
|
| 17 | 29 30 31 32 33 |
|
|
| ||
|
|
|
| |
|
|
| 18 |
|
|
|
| 19 |
|
|
|
| 18 |
|
rr Shooting and recording/playback functions section (Recording unit)
11<REC> button (page 37)
Recording is started by pressing this button. Recording is stopped by pressing this button again. This button has the same function as the VTR button on the lens side.
12<SHOT MARKER> button (page 39)
ffShot marks can be added to the thumbnail of a clip while that clip is being recorded. Thumbnails can also be selected in the LCD monitor, and shot marks can be added by pressing this button.
ffThe selected function can be assigned as the <USER3> button. Set the function to be assigned in the main menu → [CAMERA] → [USER SW] → [SHOT MARK (U3)].
13<TEXT MEMO> button (page 40)
ffText memos can be recorded by pressing this button during recording/playback or while playback is paused.
ffThe selected function can be assigned as the <USER4> button. Set the function to be assigned in the main menu → [CAMERA] → [USER SW] → [TEXT MEMO (U4)].
14P2 memory card access LED (page 32)
Indicate the access status of recording and playback of each card.
15P2 memory card slot
16Busy (active status indication) lamp (page 86)
Indicate the active status of the SD memory card, and is illuminated when the card is active.
@@NOTE
tt Do not insert or remove the card while the lamp is lit. This might damage the SD memory card.
17SD memory card slot (page 86)
This is the insertion slot for the SD memory card (optional). Use the SD memory card for recording/opening the setting menu and lens files for the camera, or uploading metadata or proxy recording, etc.
@@NOTE
tt Cautions when using SD memory cards
-On the camera, use SD memory cards that conform to the SD standard, SDHC standard, or the SDXC standard. When performing proxy recording, use SDHC memory cards, SDXC memory cards, or SD memory cards with the class description of class2 or higher.
-MMC (Multi Media Card) cannot be used. (Bear in mind that taking pictures may no longer be possible if you use them.)
-When using miniSD/microSD cards with the camera, always install the adaptor specially designed for miniSD/microSD cards. (The camera will not work properly if only the miniSD/microSD adaptor is installed. Make sure that the card has been inserted into the adaptor before use.)
-Use of Panasonic SD memory cards and miniSD/microSD cards is recommended. Be sure to format cards on the camera before use.
-Refer to our support desk at the following website for the latest information not included in these operating instructions.
-SDHC memory cards are a standard that was established in 2006 by the SD Association for
-SDXC memory cards are a standard that was established in 2009 by the SD Association for
18microP2 memory card access LED (page 32)
Indicates the access status of recording and playback of each microP2 memory card.
19microP2 memory card slot