Chapter 7 Menu
Item |
| Description of settings | Remark | ||
[SDI2/HDMI OUT] | Selects the signal form to output to the monitor output terminal (<SDI OUT2> or |
|
|
| |
| <HDMI OUT>). |
|
|
|
|
| [SYSTEM | Outputs in the system mode signal format. |
|
|
|
| MODE] |
|
|
|
|
| [DOWNCON] | Outputs the down converter signal. |
|
|
|
[1080P SDI2/HDMI | Selects whether to convert the output signal of the monitor output terminal (<SDI | ffIf the main menu → [I/F SETUP] → [OUTPUT | |||
OUT] | OUT2> or <HDMI OUT>) to 1080i when in 1080P mode. | SEL] → [SDI2/HDMI OUT] is set to [DOWNCON], | |||
| [1080P] | Outputs as 1080P. | the signal that was | ||
| regardless of these settings. | ||||
| [1080i] | Converts to 1080i and outputs. | |||
|
|
|
| ||
[3G‑SDI OUT] | Selects 1080P signals of the HD SDI output in 1080P mode. |
|
|
| |
| [LEVEL‑A] | Selects the LEVEL‑A method. |
|
|
|
| [LEVEL‑B] | Selects the LEVEL‑B DL method. |
|
|
|
[MONITOR OUT | Selects the output signals of the monitor output terminal (<SDI OUT2>, <HDMI |
|
|
| |
MODE] | OUT> or <VIDEO OUT2>). Operates independently of the <SDI OUT1> terminal. |
|
|
| |
| [MEM] | In playback mode, these are playback images. |
|
|
|
| [CAM] | When the main menu → [SYSTEM] → [SYSTEM MODE] → |
|
|
|
|
| [REC SIGNAL] is [CAM], output is always camera images. |
|
|
|
[MONITOR OUT | Selects whether the zebra pattern is superimposed over the output video signals |
|
|
| |
ZEBRA] | from the monitor output terminals (<SDI OUT2>, <HDMI OUT>, and <VIDEO |
|
|
| |
| OUT>). (The remote VBS signal also interlocks.) |
|
|
| |
| [ON] | Superimposes. |
|
|
|
| [OFF] | Does not superimpose. |
|
|
|
[SDI EDH] | Sets whether to add an error detection flag to SD SDI output. |
|
|
| |
| [ON], [OFF] |
|
|
|
|
[THUMBNAIL OUT] | Selects whether to output the thumbnail of a clip displayed on the LCD monitor |
|
|
| |
| to the <SDI OUT1> terminal, <SDI OUT2> terminal, <HDMI OUT> terminal, and |
|
|
| |
| <VIDEO OUT> terminal. |
|
|
| |
| [ON] | Performs output. |
|
|
|
| [OFF] | Does not output. |
|
|
|
|
|
|
|
| are factory settings. |
|
|
|
|
|
|
[SDI OUT1 MARKER] |
|
|
|
| |
|
|
|
| ||
Item |
| Description of settings | Remark | ||
[MARKER SW] | Switches the marker. |
|
|
| |
| [ON] | Displays. |
|
|
|
| [OFF] | Does not display. |
|
|
|
[CENTER MARK] | Switches the center marker. |
|
|
| |
| [1] | + (large) |
|
|
|
| [2] | Open center (large) |
|
|
|
| [3] | + (small) |
|
|
|
| [4] | Open center (small) |
|
|
|
| [OFF] | Does not display. |
|
|
|
[SAFETY MARK] | Selects the type of frame for the safety zone marker. |
|
|
| |
| [1] | Box |
|
|
|
| [2] | Corners |
|
|
|
| [OFF] | Does not display. |
|
|
|
[SAFETY AREA] | Sets the size of the safety zone marker. |
|
|
| |
| The constant ratio of length to width can be set in 1% increments. |
|
|
| |
| [80%]…[90%]…[100%] |
|
|
| |
[FRAME MARK] | Enables/disables frame marker. |
|
|
| |
| [ON], [OFF] |
|
|
|
|
[FRAME SIG] | Sets frame marker aspect ratio. | ff[VISTA] is 16:8,65, and [CNSCO] is 16:6,81. | |||
| [4:3], [13:9], [14:9], [VISTA], [CNSCO] |
|
|
| |
[USER BOX] | Sets whether to display the user box to the signal from the <SDI OUT1> terminal. |
|
|
| |
| [ON], [OFF] |
|
|
|
|
[USER BOX WIDTH] | Sets the width of the user box. |
|
|
| |
| [1]…[13]…[100] |
|
|
|
|
[USER BOX HEIGHT] | Sets the height of the user box. |
|
|
| |
| [1]…[13]…[100] |
|
|
|
|
[USER BOX H POS] | Sets the horizontal position of the center of the user box. |
|
|
| |
| [−50]…[0]…[50] |
|
|
|
|
[USER BOX V POS] | Sets the vertical position of the center of the user box. |
|
|
| |
| [−50]…[0]…[50] |
|
|
|
|
|
|
|
|
| are factory settings. |