Chapter 7 Menu
[MONI OUT MARKER]
Item |
| Description of settings | Remark | ||
[CENTER MARK] | Switches the center marker. |
|
|
| |
| [1] | + (large) |
|
|
|
| [2] | Open center (large) |
|
|
|
| [3] | + (small) |
|
|
|
| [4] | Open center (small) |
|
|
|
| [OFF] | Does not display. |
|
|
|
[SAFETY MARK] | Selects the type of frame for the safety zone marker. | ffIf the main menu → [I/F SETUP] → [DOWNCON | |||
|
|
| SETTING] → [DOWNCON MODE] is set to [SIDE | ||
| [1] | Box | |||
| CROP] or [LETTER BOX], the safety zone marker | ||||
| [2] | Corners | |||
| is not displayed to the down converter output | ||||
| [OFF] | Does not display. | signal in HD mode. | ||
[SAFETY AREA] | Sets the size of the safety zone marker. |
|
|
| |
| The constant ratio of length to width can be set in 1% increments. |
|
|
| |
| [80%]…[90%]…[100%] |
|
|
| |
[FRAME MARK] | Enables/disables frame marker. |
|
|
| |
| [ON], [OFF] |
|
|
|
|
[FRAME SIG] | Sets frame marker aspect ratio. | ff[VISTA] is 16:8,65, and [CNSCO] is 16:6,81. | |||
| [4:3], [13:9], [14:9], [VISTA], [CNSCO] |
|
|
| |
[USER BOX] | Sets whether to display the user box to the signal from the monitor output terminal | ffIf the main menu → [I/F SETUP] → [DOWNCON | |||
| (<SDI OUT2>, <HDMI OUT>, or <VIDEO OUT>). | SETTING] → [DOWNCON MODE] is set to [SIDE | |||
| [ON], [OFF] |
| CROP] or [LETTER BOX], the user box is not | ||
|
|
| displayed to the down converter output signal in | ||
|
|
| HD mode. | ||
[USER BOX WIDTH] | Sets the width of the user box. |
|
|
| |
| [1]…[13]…[100] |
|
|
|
|
[USER BOX HEIGHT] | Sets the height of the user box. |
|
|
| |
| [1]…[13]…[100] |
|
|
|
|
[USER BOX H POS] | Sets the horizontal position of the center of the user box. |
|
|
| |
| [−50]…[0]…[50] |
|
|
|
|
[USER BOX V POS] | Sets the vertical position of the center of the user box. |
|
|
| |
| [−50]…[0]…[50] |
|
|
|
|
|
|
|
|
| are factory settings. |
|
|
|
|
|
|
[DOWNCON SETTING] |
|
|
|
| |
|
|
|
| ||
Item |
| Description of settings | Remark | ||
[DOWNCON MODE] | Sets the mode of the down converter output signal. | ffWhen [LETTER BOX] is selected, some parts of | |||
| [SIDE CROP], [LETTER BOX], [SQUEEZE] | the top and bottom edges of the down converter | |||
|
|
| output video may be distorted. This is not a | ||
|
|
| malfunction. | ||
[DETAIL] | Turns detail function for the down converter output signal [ON]/[OFF]. | ffEven if this setting is [OFF], the detail components | |||
| [ON], [OFF] |
| set during HD signal processing cannot be | ||
| The down converter output signal contains detail components set during HD signal | disabled. | |||
| processing. |
|
|
|
|
| This setting superimposes the detail components exclusive to down converter |
|
|
| |
| output to that signal. |
|
|
| |
[H.DTL LEVEL] | Sets horizontal detail correction level for the down converter output signal. |
|
|
| |
| [0]…[8]…[31] |
|
|
|
|
[V.DTL LEVEL] | Sets vertical detail correction level for the down converter output signal. |
|
|
| |
| [0]…[4]…[31] |
|
|
|
|
[DTL CORING] | Sets the detail noise removal level. |
|
|
| |
| [0], [1]…[15] |
|
|
|
|
[H.DTL FREQ.] | Selects the horizontal detail frequency. |
|
|
| |
| [2.5MHz], [3MHz], [3.5MHz], [4MHz], [4.5MHz] |
|
|
| |
[2D LPF] | Sets the filter. |
|
|
|
|
| [ON] | Reduces cross colors. |
|
|
|
| [OFF] | Does not reduce cross colors. |
|
|
|
|
|
|
|
| are factory settings. |