Chapter 3 Recording and
Error displays | Behavior and cause | Action to take | |
(viewfinder screen) | |||
|
| ||
[SD END] | Proxy data recording to the SD memory card will stop, but | After finishing recording, insert a new SD memory card. | |
| recording to the P2 card will continue. | ffThe proxy data being recorded to the SD memory card will | |
| ffNo SD memory card capacity remains. | be deleted. | |
|
| To restore the deleted proxy data, select clips in the P2 card | |
|
| and copy them to the SD memory card. (page 44) | |
[SD WR ERR] | Proxy data recording to the SD memory card will stop, but | Check the status of the SD memory card and insert a | |
| recording to the P2 card will continue. | recordable card. (page 42) | |
| Even if the main menu → [REC/PB] → [PROXY SETUP] → |
| |
| [REC MEDIA] is set to [P2&SD], this is displayed when proxy |
| |
| data cannot be recorded to the SD memory card. |
|
| rr If the error message is displayed when recording |
|
| starts: |
|
| ffThe SD memory card format is different. |
|
| ffThe SD memory card contains 1000 clips or more. |
|
| ffAn attempt is made to record to an SD memory card |
|
| containing data for updating the firmware of the camera. |
|
| rr If the error message is displayed during |
|
| recording: |
|
| ffThe SD memory card was ejected during recording. |
|
| ffAn error occurred in recording to the SD memory card. |
|
[SD | Proxy data will not be recorded to the SD memory card, but | Check the status of the SD memory card. |
| recording to the P2 card will be performed. |
|
| ffNo SD memory card is inserted. [SD |
|
| ffThe SD memory card is |
|
Copying proxy data to the SD memory card
1Press the <THUMBNAIL MENU> button to display the thumbnail screen.
2 Use the cursor buttons to move the cursor to the clip to be copied, and press the <SET> button.
3Press the <MENU> button.
4Select [SD CARD] in the main menu → [CLIP] → [COPY].
5Select [YES] in the confirmation message and press the <SET> button.
@@NOTE
tt If [SD END] is displayed and the proxy data being recorded to the SD memory card is deleted, perform this procedure to copy the proxy data from the P2 card, and enable the deleted proxy data to be restored.
tt Source data is not copied.