Panasonic AJ-PX5000G manual 149

Chapter 7 Menu Operations — Menu list

Item		Description of settings		Remark
[USER1]	(Select a	Assigns the <USER1> button.
	function)	For selectable functions and an explanation of functions, refer
		to “Assigning functions to <USER> buttons” (page 56).
		[S.GAIN] is assigned in the factory setting.
	(Detection	Selects a response to accept when the <USER1> button is
	time)	pressed.
		[NORMAL]	Accepts immediately when pressed.
		[1sec]	Accepts when pressed and held down for
			approx. one second.
[USER2]	(Select a	Assigns the <USER2> button.
	function)	For selectable functions and an explanation of functions, refer
		to “Assigning functions to <USER> buttons” (page 56).
		[DS.GAIN] is assigned in the factory setting.
	(Detection	Selects a response to accept when the <USER2> button is
	time)	pressed.
		[NORMAL]	Accepts immediately when pressed.
		[1sec]	Accepts when pressed and held down for
			approx. one second.
[SHOT MARK (U3)]	(Select a	Assigns the <SHOT MARKER> button.
	function)	For selectable functions and an explanation of functions, refer
		to “Assigning functions to <USER> buttons” (page 56).
		[SHOT MARK] is assigned in the factory setting.
	(Detection	Selects a response to accept when the <SHOT MARKER>
	time)	button is pressed.
		[NORMAL]	Accepts immediately when pressed.
		[1sec]	Accepts when pressed and held down for
			approx. one second.
[TEXT MEMO (U4)]	(Select a	Assigns the <TEXT MEMO> button.
	function)	For selectable functions and an explanation of functions, refer
		to “Assigning functions to <USER> buttons” (page 56).
		[TEXT MEMO] is assigned in the factory setting.
	(Detection	Selects a response to accept when the <TEXT MEMO> button
	time)	is pressed.
		[NORMAL]	Accepts immediately when pressed.
		[1sec]	Accepts when pressed and held down for
			approx. one second.
					are factory settings.
[SW MODE]
Item		Description of settings		Remark
[RET SW]	Sets the function when the <RET> button on the lens is pressed.			ffThe return video is not displayed correctly when
	[INHIBIT]	The <RET> button function is disabled.		an image signal that differs from the video system
				of this camera.
	[REC CHECK]	Recording check function is enabled. Records can be checked
				ffWhen the main menu → [I/F SETUP] →
		of the last several seconds recorded.		[GENLOCK] → [GENLOCK] is set to [INT], return
	[CAM RET]	Return video function is enabled. While the <RET> button is
				video images may sometimes be skewed slightly
		pressed, the signal supplied to the <SDI IN> terminal can be		in the horizontal direction.
		checked on the viewfinder and LCD monitor.
				ffWhen switching between camera images and
	[ASSIST]	Turns the focus assist display [ON]/[OFF].
				return video images, the image on the viewfinder
	[D.ZOOM]	Digital zoom function is enabled. Digital zoom can be switched		and LCD monitor may be disrupted for an instant.
		[ON]/[OFF].		This is not a malfunction.
	[EVF CLR]	Selects whether to display video in the viewfinder in color or in
		black and white.
	[TEXT MEMO]	Text memo function is enabled. A text memo can be recorded to
		the frame selected when the button is pressed.
	[SHOT MARK]	Shot mark function is enabled. Press to add a shot mark, and
		press again to remove it.
[S.BLK LVL]	Sets the super black level.
	[−30], [−20], [−10], [OFF]
[AUTO KNEE SW]	Enables/disables auto knee function and DRS function.
	[DRS]	When the <AUTO KNEE> switch is in the <ON> position, DRS
		function is enabled.
	[ON]	When the <AUTO KNEE> switch is in the <ON> position, auto
		knee function is enabled.
	[OFF]	Even if the <AUTO KNEE> switch is in the <ON> position, both
		auto knee function and DRS function are not enabled.
[SHD,ABB SW CTL]	Sets whether to automatically adjust black shading when the <AUTO W/B BAL>
	switch is pressed and held down on the <ABB> side for two seconds or more.
	[ON], [OFF]
					are factory settings.

– 149 –