Chapter 9 Maintenance and Inspection — Warning system

Message

Description

Measure

 

When adding a counter value to the clip name, characters

For the counter addition setting, the user clip name plus the

[USER CLIP NAME MODIFIED!]

counter value can only contain up to 100 bytes. Characters in

 

must be deleted.

the clip name are automatically deleted when the total number

 

 

of characters exceeds this limit.

[WRITE PROTECTED!]

The P2 card or SD memory card is write-protected.

Insert write-accessible media.

rr Soft keyboard

Message

Description

Measure

[AUTHENTICATION ERROR!]

Manual authentication failed.

Enter the correct password.

[CANNOT CHANGE!]

An attempt is made to enter the [PERSON] item (user who

Enter the [TEXT] (text information) first.

enters the memo) when there is no text memo.

 

 

[CANNOT SET!]

The entered value is invalid.

Change the input value.

[INVALID VALUE!]

 

 

[CANNOT SET!]

There is not input to the software keyboard.

Enter the password.

[NO INPUT!]

 

 

[CANNOT SET!]

 

 

[RETRY PASSWORD IS

The re-entered password is different.

Enter the correct reference password.

DIFFERENT!]

 

 

rr Storage

Message

Description

Measure

[CANNOT ACCESS CARD!]

An error occurred while accessing the P2 card.

Check the P2 card.

[CANNOT ACCESS TARGET!]

An error occurred while accessing the connection target.

Check the storage device status and connection.

[CANNOT COPY! FORMAT

The partition that can copy clips does not exist on the storage

Reformat in FAT format, or export the P2 card to create a

STORAGE DEVICE TO FAT]

device.

partition.

[CANNOT FORMAT!]

The storage device cannot be formatted.

Change the connected storage device.

[CANNOT RECOGNIZE

The storage device is not correctly recognized.

Reboot the storage device or connect another storage device.

STORAGE DEVICE!]

 

 

[CANNOT SELECT! MAX.6

Storage devices with more than 6 partitions cannot be

Release selected partitions.

PARTITIONS]

selected (mounted simultaneously).

 

[CARD IS EMPTY! CANNOT

The P2 card to copy is empty.

The copy operation is not performed because the card is

COPY!]

empty.

 

[FORMAT P2 CARD!]

Cannot import to a P2 card containing clips.

Format the P2 card.

[LACK OF CAPACITY!]

Not enough space left on the storage device.

Use a new storage device with sufficient available space or a

formatted storage device.

 

 

[MISMATCH COMPONENT!]

The P2 card model number of the copy source and copy

Use the P2 cards of the same model number, or import on a

destination do not match. Cannot copy.

clip basis.

 

[STORAGE DEVICE

 

Reconnect the USB cable to the <USB3.0> terminal (host).

The connection with the storage device is disconnected.

When it does not function normally after that, turn off the

DISCONNECTED!]

 

power once and turn on the power again.

 

 

[TOO MANY PARTITIONS!]

There are too many partitions.

The maximum number of partitions on the storage device is

23. Either reformat, or use a new storage device.

 

 

[UNKNOWN DEVICE

A non-compatible DVD drive or other device is connected.

Change the connected device to the correct storage device,

CONNECTED!]

and then turn the power off once and turn it on again.

 

[VERIFICATION FAILED!]

The compare check performed after copying failed.

Copy it again.

– 198 –