Chapter 4 Adjustments and Settings for
24Focus control information
Displays the focus control information with [99] to [00]. When a lens other than a serial lens is connected, the focus control information is not displayed. When a serial lens is connected, the display unit can be changed in the main menu → [VF] → [VF INDICATOR] → [ZOOM/FOCUS].
25Information display such as
[P‑REC] (flashing) | Displayed after recording is stopped and until recording of video/audio to P2 card completely stops. Do not remove the P2 card | |
or turn the power off until the flashing indication completely goes out. | ||
| ffWhen the | |
Illuminated if the <MARKER SEL>/<MODE CHECK/MENU CANCEL> switch is pushed towards the <MCK/MCL> side when the | ||
(illuminated) | ||
to switch to the | ||
|
26Gamma mode display
Displays the gamma mode currently selected by [GAMMA MODE SEL] in the main menu → [PAINT] → [GAMMA]. [HD]/[SD]/[FLK1]/[FLK2]/[FLK3]/[FREC]/[VREC]
27Lock status display of auto tracking white balance
Displayed when the <USER> button where [ATW LOCK] is assigned is pressed and the color temperature is fixed while auto tracking white balance is active.
28Type of marker
Displays the type of currently displayed marker. [MKR:A/B/OFF]
29Y GET brightness display
In the Y GET mode, the image level in the frame displayed near the center of the screen is displayed as 0% to 109%.
30
Displayed when set [HIGH SENS.] in the main menu → [PAINT] → [[S] CAMERA SETTING] → [SHOOTING MODE].
31Flash band compensation (FBC) function display
Displayed when the flash band compensation function is activated.
32Chromatic aberration compensation
| [CAC] | Displayed when the chromatic aberration compensation function is active. | |
33 Battery charge level/voltage | |||
|
|
| |
| [**.*V] | Displays the battery charge level in 0.1 V units. | |
[***%] | Displays the charge level of batteries with charge level information in %. | ||
| [EMP] | Displayed when there is no charge level on batteries with charge level information or the level is at the near end setting value or | |
|
| below. | |
| [MAX] | Displayed when batteries with charge level information are fully charged. | |
34 P2 card remaining free space | |||
|
|
| |
[ ] | This is the slot No. This is displayed in black and white inversion when the slot No. is recording destination. It flashes while the | ||
card is being recognized. | |||
|
| ||
| [***min] | Displays the remaining space on the media in each slot. During a near end, it flashes. | |
| 0 to 599 indicates minutes, while 600 minutes or longer indicates hours. | ||
|
| ||
| (No display) | Not displayed when a card is not inserted. | |
| [END] | Displayed when there is no space remaining on each card. | |
| [WP] | Displayed when the P2 card is | |
| [ERR] | Displayed in the case of format errors or authentication errors. | |
|
| Displayed when the loop recording mode is set. During the mode check, the 2nd line displayed the standard recording time of | |
| [LOOP ***min] | loop recording. | |
|
| [LOOP] flashes when loop recording is not possible, for example, when there is no more space remaining on the P2 card. | |
35Recording media display
From among P2 and microP2 memory card slots, displays the slots that can be used for recording/playback, which is set in the main menu → [REC/ PB] → [REC/PB SETUP] → [REC MEDIA].
[P2] | P2 memory card slot |
[mP2] | microP2 memory card slot |
36System mode
Displays the mode in which the camera is operating.
| [1080‑59.94P] | 1080/59.94 progressive mode |
| [1080‑59.94i] | 1080/59.94 interlaced mode |
| [1080‑50P] | 1080/50 progressive mode |
| [1080‑50i] | 1080/50 interlaced mode |
| [480‑59.94i] | 480/59.94 interlaced mode |
| [576‑50i] | 576/50 interlaced mode |
37 Recording operation status display | ||
|
|
|
| [REC] | Displayed when set [CHAR] in the main menu → [REC/PB] → [REC/PB SETUP] → [REC TALLY]. This is also displayed when |
|
| set [ON] in the main menu → [VF] → [VF INDICATOR] → [REC STATUS]. |