Chapter 5 Preparation — Preparing for audio input

Preparing for audio input

Prepare the camera for connecting audio input devices.

Using the front microphone

Microphones such as the stereo microphone kit AJ‑MC900G (optional) can be mounted.

Viewfinder

Viewfinder clamping screw

Microphone holder

<MIC IN> terminal

Fig. 1

Fig. 2

Fig. 3

1Open the microphone holder. (Fig. 1)

2 Mount the microphone and tighten the viewfinder clamping screw. (Fig. 2)

Mount with the UP indication on the microphone facing up.

3Connect the microphone cable to the <MIC IN> terminal on the camera. (Fig. 3)

4According to the audio channel to be recorded, switch the <AUDIO IN> switch to <FRONT>.

Using a wireless microphone receiver

Fig. 1

1Remove the cover to insert the wireless microphone receiver and secure it with the screws. (Fig. 1)

2 According to the audio channel to be recorded, switch the <AUDIO IN> switch to <W.L.>.

3When using a two-channel wireless microphone receiver, set [DUAL] in the main menu → [I/F SETUP] → [MIC/AUDIO] →

[WIRELESS TYPE].

– 102 –