Chapter 2 Description of Parts — Audio (input) function section

Audio (input) function section

5

2

3

4

1 6

7

9

8

1<F.AUDIO LEVEL> (audio recording level adjustment) dial (page 59) ffAdjust the recording level of audio channels 1/2 (or 3/4).

ffSet which of audio channels 1/2 or 3/4 is to be adjusted at the main menu → [I/F SETUP] → [MIC/AUDIO] → [VR SELECT].

ffWhen the position of the <AUDIO SELECT CH1/3>/<AUDIO SELECT CH2/4> switch is at <AUTO>, adjustment is automatic, and the <F.AUDIO LEVEL> and <AUDIO LEVEL CH1/3>/<AUDIO LEVEL CH2/4> dials do not function.

ffSet whether to enable the <F.AUDIO LEVEL> dial at the main menu → [I/F SETUP] → [MIC/AUDIO] → [FRONT VR CH1(CH3)] or [FRONT VR CH2(CH4)].

2<AUDIO LEVEL CH1/3>/<AUDIO LEVEL CH2/4> (audio channel 1/3, 2/4 recording level adjustment) dial

ffWhen the <AUDIO SELECT CH1/3>/<AUDIO SELECT CH2/4> switch is set to <MANU>, the recording level of audio channels 1/2 (3/4) can be adjusted by these dials.

ffSet which of audio channels 1/2 or 3/4 is to be adjusted at the main menu → [I/F SETUP] → [MIC/AUDIO] → [VR SELECT]. ffThese knobs have a locking mechanism, so turn the dial while pressing in when making adjustments.

3<AUDIO IN> (audio input selector) switch

Select the input signal to be recorded to audio channel 1/2/3/4.

<FRONT>

Records the microphone input signal connected to the <MIC IN> (microphone input) terminal.

<W.L.>

Records the input signal from the wireless microphone receiver.

<REAR>

Records the audio input signal from the audio equipment connected to <AUDIO IN CH1/3> and <AUDIO IN CH2/4> (audio input

channels 1/3, 2/4) terminals.

 

@@NOTE

tt When the stereo microphone AJ‑MC900G (optional) is used, set both <CH1> and <CH2> (or <CH3> and <CH4>) to <FRONT>. L CH is recorded to <CH1> (<CH3>), and R CH is recorded to <CH2> (<CH4>), respectively.

4<AUDIO SELECT CH1/3>/<AUDIO SELECT CH2/4> (audio channel 1/3, 2/4/automatic/manual level adjustment selector) switch

Select the method to adjust the recording level for audio channel 1/2 (3/4).

<AUTO> Adjusts automatically.

<MANU> Adjusts manually.

ffSet which of audio channels 1/2 or 3/4 is to be adjusted at the main menu → [I/F SETUP] → [MIC/AUDIO] → [VR SELECT].

5Wireless slot (page 102)

Mount the UniSlot wireless microphone receiver (optional).

6<LINE>/<MIC> (line input/microphone input) selector switch (page 103)

Switch the audio input signal connected to <AUDIO IN CH1/3> and <AUDIO IN CH2/4> (audio input channels 1/3, 2/4) terminals.

<LINE>

Inputs audio signals from line-input audio equipment.

<MIC>

Inputs audio signals from the microphone.

7Microphone input power selector switch (page 191)

Turn on/off the power supply to the microphone connected to the <AUDIO IN CH1/3> and <AUDIO IN CH2/4> (audio input channels 1/3, 2/4) terminals.

<+48V> Supplies +48 V power to the microphone.

<OFF> Does not supply power to the microphone.

@@NOTE

tt When microphone input <+48V> is set and microphones are not connected to the <AUDIO IN CH1/3> and <AUDIO IN CH2/4> terminals, low- frequency noise may occur. This is not a problem when a microphone is connected.

– 17 –