Chapter 7 Menu
Item | Description of settings | Remark | ||
[ENDURA10 NEAR | Selects the near end voltage in steps of 0.1 V when the main menu → [I/F |
|
|
|
END] | SETUP] → [BATTERY/P2CARD] → [BATTERY SELECT] is set to [ENDURA10]. |
|
|
|
| [12.0V]…[13.4V]…[15.0V] |
|
|
|
[PAG L96e NEAR | Selects the near end voltage in steps of 0.1 V when the main menu → [I/F |
|
|
|
END] | SETUP] → [BATTERY/P2CARD] → [BATTERY SELECT] is set to [PAG L96e]. |
|
|
|
| [12.0V]…[13.0V]…[15.0V] |
|
|
|
[TYPE A FULL] | Selects the voltage for full display in steps of 0.1 V when the main menu → [I/F | The [TYPE A] factory setting corresponds to the IDX | ||
| SETUP] → [BATTERY/P2CARD] → [BATTERY SELECT] is set to [TYPE A]. | ENDURA ELETE. | ||
| [13.0V]…[15.6V]…[17.0V] |
|
|
|
[TYPE A NEAR END] | Selects the near end voltage in steps of 0.1 V when the main menu → [I/F |
|
|
|
| SETUP] → [BATTERY/P2CARD] → [BATTERY SELECT] is set to [TYPE A]. |
|
|
|
| [11.0V]…[13.2V]…[15.0V] |
|
|
|
[TYPE A END] | Selects the end voltage in steps of 0.1 V when the main menu → [I/F SETUP] → |
|
|
|
| [BATTERY/P2CARD] → [BATTERY SELECT] is set to [TYPE A]. |
|
|
|
| [11.0V]…[12.5V]…[15.0V] |
|
|
|
[TYPE B FULL] | Selects the voltage for full display in steps of 0.1 V when the main menu → [I/F | The [TYPE B] factory setting corresponds to the | ||
| SETUP] → [BATTERY/P2CARD] → [BATTERY SELECT] is set to [TYPE B]. | Anton/Bauer DIONIC HC. | ||
| [13.0V]…[15.9V]…[17.0V] |
|
|
|
[TYPE B NEAR END] | Selects the near end voltage in steps of 0.1 V when the main menu → [I/F |
|
|
|
| SETUP] → [BATTERY/P2CARD] → [BATTERY SELECT] is set to [TYPE B]. |
|
|
|
| [11.0V]…[12.9V]…[15.0V] |
|
|
|
[TYPE B END] | Selects the end voltage in steps of 0.1 V when the main menu → [I/F SETUP] → |
|
|
|
| [BATTERY/P2CARD] → [BATTERY SELECT] is set to [TYPE B]. |
|
|
|
| [11.0V]…[12.5V]…[15.0V] |
|
|
|
[TYPE C FULL] | Selects the voltage for full display in steps of 0.1 V when the main menu → [I/F |
|
|
|
| SETUP] → [BATTERY/P2CARD] → [BATTERY SELECT] is set to [TYPE C]. |
|
|
|
| [13.0V]…[15.9V]…[17.0V] |
|
|
|
[TYPE C NEAR END] | Selects the near end voltage in steps of 0.1 V when the main menu → [I/F |
|
|
|
| SETUP] → [BATTERY/P2CARD] → [BATTERY SELECT] is set to [TYPE C]. |
|
|
|
| [11.0V]…[13.2V]…[15.0V] |
|
|
|
[TYPE C END] | Selects the end voltage in steps of 0.1 V when the main menu → [I/F SETUP] → |
|
|
|
| [BATTERY/P2CARD] → [BATTERY SELECT] is set to [TYPE C]. |
|
|
|
| [11.0V]…[12.5V]…[15.0V] |
|
|
|
[BATT STAT NEAR | Selects the near end percent value. | ffWhen the battery charge level percentage cannot | ||
END] | [4%], [5%], [6%], [7%], [8%], [9%], [10%], [12%], [14%], [16%], [18%], [20%] | be detected, this will follow the near end voltage | ||
|
| value set in [TYPE A]. | ||
|
| ffIf a battery is used for which the remaining charge | ||
|
| is displayed in units of 10%, the setting value and | ||
|
| actual near end warning may vary slightly. | ||
[BATT STAT END] | Selects the end percent value. | ffWhen the battery charge level percentage cannot | ||
| [1%]…[10%] | be detected, this will follow the end voltage value | ||
|
| set in [TYPE A]. | ||
|
| ffWhen using a battery which displays battery | ||
|
| charge level by units of 10%, end is determined | ||
|
| only in two stages: when it is set between [1%] | ||
|
| and [5%], or when it is set between [6%] to [10%]. | ||
[ENDURA STAT | Selects the near end percent value. | ffWhen the battery charge level percentage cannot | ||
NEAR END] | [4%], [5%], [6%], [7%], [8%], [9%], [10%], [12%], [14%], [16%], [18%], [20%] | be detected, this will follow the near end voltage | ||
|
| value set in [TYPE A]. | ||
|
| ffIf a battery is used for which the remaining charge | ||
|
| is displayed in units of 10%, the setting value and | ||
|
| actual near end warning may vary slightly. | ||
[ENDURA STAT END] | Selects the end percent value. | ffWhen the battery charge level percentage cannot | ||
| [1%]…[10%] | be detected, this will follow the end voltage value | ||
|
| set in [TYPE A]. | ||
|
| ffWhen using a battery which displays battery | ||
|
| charge level by units of 10%, end is determined | ||
|
| only in two stages: when it is set between [1%] | ||
|
| and [5%], or when it is set between [6%] to [10%]. | ||
|
|
|
| are factory settings. |
SD memory cards cannot be read, and file operations associated with saves, [LOAD USER DATA] and [LOAD FACTORY DATA] cannot be performed in the following cases:
ffWhile the thumbnail screen is displayed
Remedy: Press the <THUMBNAIL> button to close the thumbnail screen, and try the operations again. ffDuring playback
Remedy: Press the <STOP> button to stop playback, and try the operations again.