Chapter 4 Adjustments and Settings for Recording — Setting the electronic shutter

tt A subject that quickly crosses the camera may appear distorted when shot. This is due to the method applied for reading the signals from the pickup device (MOS sensor), and is not a malfunction.

tt Shutter mode is off while the digital super gain function is active.

Viewfinder screen display for shutter

For details, refer to “Viewfinder status display” (page 70).

Setting the synchro scan mode

Follow the steps below to operate.

<SYNCHRO SCAN> adjustment button <SHUTTER> switch

1Press the <SHUTTER> switch from the <ON> side towards the <SEL> side to set the camera to synchro scan mode.

2 Operate the <SYNCHRO SCAN> adjustment button to switch the mode continuously.

The shutter speed display in the synchro scan mode can be switched between seconds and angle in the main menu → [VF] → [VF DISPLAY] →

[SYNCHRO SCAN DISP].

– 54 –