Chapter 4 Adjustments and Settings for Recording — Viewfinder status display

 

Displayed when automatic white balance operation is not ended successfully. The 2nd line displays that status.

 

[COLOR TEMP LOW]

Warns that the color temperature is too low.

[AWB NG]

[COLOR TEMP HIGH]

Warns that the color temperature is too high.

[LEVEL OVER]

Warns that the brightness is too high.

 

 

[LOW LIGHT]

Warns that the brightness is too low.

 

[TIME OVER]

Warns that processing could not be executed within the operation time.

[ATW MODE]

Displayed when automatic white balance cannot be executed due to activation of auto tracking white balance.

[AWB PRESET *.*K]

Displayed when the <WHITE BAL> switch is set to <PRST> and automatic white balance operation cannot be executed.

[AWB UNABLE]

Displayed when automatic white balance operation cannot be executed. The 2nd line displays that status.

[S.GAIN MODE]

Displayed when super gain is active.

 

[CHECK FILTER]

Prompts re-confirmation of the filter switching dial position when the power is turned on and automatic white balance is active.

[ABB ACTIVE]

Displayed when automatic black balance operation is active.

[ABB OK]

Displayed when automatic black balance operation is ended successfully.

[ABB BREAK]

Displayed when automatic black balance operation is forcibly ended.

[ABB NG]

Displayed when automatic black balance operation is not ended successfully.

[B‑SHD READY]

Displayed when black shading operation is accepted by holding down the <AUTO W/B BAL> switch during automatic black

balance operation.

 

 

 

[B‑SHD ACTIVE]

Displayed when black shading operation is active.

[B‑SHD OK]

Displayed when black shading operation is ended.

[B‑SHD BREAK]

Displayed when black shading operation is forcibly ended.

[B‑SHD NG]

Displayed when black shading operation is not ended successfully.

(Switch selection display)

 

Displayed when the <WHITE BAL> switch is switched. One of [A]/[B]/[PRST] is displayed at [#].

[WHITE:#]

[ATW MODE]

Displayed when automatic tracking white balance operation is set.

 

[*.*K]

Displays the currently set color temperature.

[AUTO KNEE:ON/OFF]

Displayed when the <OUTPUT>/<AUTO KNEE> selector switch where [ON] or [OFF] is assigned in the main menu →

[CAMERA] → [SW MODE] → [AUTO KNEE SW] is set to <ON>/<OFF>.

 

[DRS:ON/OFF]

Displayed when the <OUTPUT>/<AUTO KNEE> selector switch where [DRS] is assigned in the main menu → [CAMERA] →

[SW MODE] → [AUTO KNEE SW] is set to <ON>/<OFF>.

 

[GAIN:**dB+**↑]

Displayed when gain is switched by the <GAIN> switch or <USER> button. When digital super gain is active, that value is

displayed at the same time.

 

[SS:1/****] or

When the shutter speed is switched, that value is displayed.

[***.*deg]

 

 

[SS: w 1/****] or

Displayed when syncro scan is selected for the shutter speed.

[w***.*d]

 

 

[CC:**** **K]

Displayed when the <CC FILTER> dial position is switched.

[ND:*]

Displayed when the <ND FILTER> dial position is switched.

[EXTENDER:ON/OFF]

Displays the status of the lens extender.

[IRIS:**F*.*]

Displayed when the iris override compensation value is altered.

(Drop in brightness warning display)

[LOW LIGHT] Displayed when brightness has dropped.

(Flash band compensation warning display)

[FBC OFF!]

Displayed when a flash band is detected while flash band compensation is off.

[SHUTTER&FBC ON!]

Displayed when the <SHUTTER> switch is <ON> and flash band compensation is set to on.

6<USER> button assignment information

[UM]

Indicates the <USER MAIN> button.

[U1]

Indicates the <USER1> button.

[U2]

Indicates the <USER2> button.

[U3]

Indicates the <SHOT MARK> button.

[U4]

Indicates the <TEXT MEMO> button.

[RET]

Indicates the <RET> button.

[INHIBIT]

Displayed when the <USER> button is not operated.

[S.GAIN **dB/OFF]

Displays the selected super gain.

[DS.GAIN **↑/OFF]

Displays the selected digital super gain.

[S.IRIS ON/OFF]

Displays the super iris operation status.

[I.OVR ON/OFF]

Displays the iris override operation status.

[S.BLK −**/OFF]

Displays the super black operation status. During operation, the setting value is also displayed.

[B.GAMMA ON/OFF]

Displays the operation status of black gamma (black level tone compensation).

[D.ZOOM x2/x3/x4/OFF]

Displays the digital zoom factor.

[ATW ON/OFF]

Displays the operation status of automatic tracking white balance.

[ATW LOCK ON/OFF]

Displays the lock status of automatic tracking white balance operation.

[AUD CH1/3]

Displayed when the input signal to record to audio channel 1 or 3 is switched.

– 72 –