Chapter 7 Menu Operations — Setting menu display

Setting menu display

Setting menu basic operations

You can change camera settings using the setting menu according to the shooting scene and recording details. The menu is divided into the main menu, sub-menu, and setting item menu.

Set data are written and saved in the camera’s internal memory.

This section describes main menu operations. Main menu operation is the same as the other menus except when opening the menu screen.

c d

a b

a:Jog dial button

b:<MENU> button

c:awsq cursor buttons r <SET> button

d:<MENU> button (cursor)

Fig. 1

Fig. 2

Fig. 3

Fig. 4

1Press and hold the <MENU> button for three seconds or more when not recording. ffThe main menu is displayed.

2 Use the jog dial button (or the cursor buttons (`/{)) to place the cursor on the corresponding menu item. (Fig. 1)

ffPress the cursor buttons (`/{) to move the cursor up or down.

ffIf there is a menu in the next level, [w] is displayed in the menu items.

Press the jog dial button, the cursor button (I), or the <SET> button to open lower-level menus. (Fig. 2)

ffPress the cursor button (Y) or the <EXIT> button to return to the upper levels. You can go back to the upper levels by using the jog dial button to place the cursor on the topmost line ([EXIT]) then pressing it.

3Press the jog dial button (or the <SET> button).

– 134 –