Chapter 4 Adjustments and Settings for
Expanded display [EXPAND]
When the <USER> button (<USER MAIN>/<USER1>/<USER2>) where [ASSIST] is assigned or the <RET> button is pressed, the center of the screen is expanded approx. three times so that you can easily bring the image into focus.
EXPANDED
ffIn the expanded display, the status display and zebra pattern disappear, and [EXPANDED] is displayed at the top of the screen.
@@NOTE
tt Viewfinder screen and LCD monitor screen are expanded.
tt Expanded display is unavailable in the video output, SDI output, and HDMI output.
Focus bar display [FOCUS BAR]
The focus bar can be displayed when [ON] is set in the main menu → [VF] → [VF INDICATOR] → [FOCUS BAR]. The degree of focus is indicated by the length of the bar.
Not in focus | The bar extends to the right when the viewfinder is |
A waveform of the video can be displayed by assigning the waveform monitor function to the <USER> buttons (<USER MAIN>/<USER1>/<USER2>) and pressing the assigned buttons. Press the button again to return to the normal display.
ffThe waveform and vector displays can be switched by [WFM] (page 150) in the main menu → [CAMERA] → [SW MODE]. Whether to display the waveform monitor on either or both of the viewfinder and LCD monitor can be selected by [WFM DISP].
ffThe waveform is not displayed while the focus assist function [EXPAND] is active. ffThe waveform display cannot be recorded.