Chapter 6 Thumbnail Operations for
[FREE CAP.] | Remaining storage device capacity |
@@NOTE
tt You can change the thumbnail screen display if necessary. tt The 1001st clips onwards are not displayed.
Displaying clip information
You can display each type of metadata of clips saved in a storage device. The display mode is the same as the P2 card clip properties.
1In the storage device thumbnail screen, move the cursor to the target clip.
2 Press the <MENU> button.
3Select [CLIP PROPERTY] in the main menu → [CLIP] → [PROPERTY] and press the <SET> button. This cannot be modified.
Deleting clips
You can delete unnecessary clips saved in a storage device.
1In the storage device thumbnail screen, select the clip you want to delete.
2 Press the <MENU> button.
3Select [DELETE] in the main menu → [CLIP] and press the <SET> button.
4Move the cursor to [YES] in the confirmation message and press the <SET> button.
@@NOTE
tt You may not be able to delete clips with defective clip or unknown clip indicators.
Writing back to the P2 card from a storage device (import)
Importing from a [TYPE S] storage device or [P2STORE] by partition
You can import (write back to a P2 card from as storage device) to a P2 card with the same part number as the source card by partition (card).
1Insert a P2 card that will serve as the input destination. Make sure to insert a formatted P2 card.
2 Connecting a storage device.
3Select [STORAGE] in the main menu → [CLIP] → [EXPLORE] to display the explorer screen.
4In the explorer screen, display the partition thumbnails to be imported.
5Select [IMPORT] in the main menu → [CLIP].
6 Place the cursor on the import destination P2 card slot number and press the <SET> button.
Start importing by selecting [YES] in the confirmation message. [COPY COMPLETED!] will be displayed when importing is completed.
@@NOTE
tt Importing to a P2 card that is different from the source P2 card may result in incomplete clips depending on the clips. In this case, use the reconnection function to reconfigure the clips.
tt You can switch verification during copying on and off by setting the main menu → [CLIP] → [STORAGE COPY SETUP] → [VERIFY]. tt You cannot import by partition to a P2 card of a different model. Perform copying by clip instead.
Copying to a P2 card by clip
You can specify a storage device clip and copy it to a P2 card.
1Open the storage device thumbnail screen.
2 Select the clip you want to copy.
3Press the <MENU> button.
4In the main menu → [CLIP] → [COPY] → [STORAGE] list, move the cursor over the copy destination and press the <SET> button.
Start importing by selecting [YES] in the confirmation message. [COPY COMPLETED!] will be displayed when copying is completed.