Chapter 9 Maintenance and Inspection — Warning system

Monitor display

Description

Camera operation

First row

Second row

 

 

 

[PULL DOWN] (occurs

 

 

[REC WARNING] (occurs

during recording)

The video pull-down sequence and time code values are not

 

[PULL DOWN ERROR]

Continue

during recording)

(occurs at times other

synchronized. Check the signal.

 

 

 

 

 

than during recording)

 

 

[REC WARNING]

[REC DATA]

Displayed when an error occurs in recorded data during recording.

Continue or Stop

Turn the power off and on before using it again.

 

 

 

[RUN DOWN CARD]

None

The maximum number of overwrites has been exceeded.

Continue

(slot number)

Replacement of the P2 card is recommended.

 

 

 

 

An SDHC/SDXC memory card is inserted into the microP2 memory

 

[SD CARD] (slot number)

None

card slot. The current operation will continue. Use of microP2 or P2

Continue

 

 

memory card is recommended.

 

[SLOT1/2 CANNOT

[microP2 SELECTED] or

Displayed when the card is inserted into the slot which is not selected

 

REC] or [SLOT3/4

Stop

CANNOT REC]

[P2 SELECTED]

as the recording slot.

 

 

 

 

 

 

Correct recording is not possible due to disruption of input signals

 

[TEMPORARY PAUSE]

[IRREGULAR SIG]

of the <GENLOCK IN> or <SDI IN> terminal, and recording is

 

suspended temporarily. The clip will be divided. Recording resumes

Suspend → Resume

 

 

when the signal returns to normal. However, during loop recording,

 

 

 

recording does not resume.

 

[WIRELESS‑RF]

None

Audio wireless reception status is poor.

Continue

Warning/error displays in the thumbnail operation, menu operation, and USB storage mode

rr Thumbnail and menu

Message

Description

Measure

[AUTHENTICATION ERROR!]

Manual authentication failed.

Enter the correct password.

[CANNOT ACCESS!]

Data cannot be accessed due to a content defect or some

Ensure the health of the media and the clips.

other reason.

 

 

[CANNOT CHANGE!]

For a clip with the [ ] mark, where a thumbnail cannot be

Correct the settings and content to enable display of the

generated, the thumbnail cannot be modified in the text memo

thumbnail.

 

position.

 

[CANNOT DELETE!]

The content versions do not match. Cannot delete.

Match the device and contents version.

[CANNOT FORMAT!]

A P2 card problem or some other reason prevents formatting.

Check the P2 card.

[CANNOT RE-CONNECT!]

Clips cannot be remerged because either clips not recorded

Check the selected content.

across multiple P2 cards are selected or other reasons.

 

 

[CANNOT REPAIR IN

Some of the selected clips cannot be repaired.

Check the selected content.

SELECTION!]

 

 

[CANNOT REPAIR!]

Content that cannot be repaired is selected.

Check the selected content.

[CANNOT SAVE! FILE NAME

A settings file of the same name exists on the SD memory

Use another name to save the file.

IN USE]

card.

 

[CARD FULL!]

The P2 card or SD memory card is full.

Insert a card with free space available.

[COPY IMPOSSIBLE. TOO

Files exceeding 4 GB cannot be copied to memory card of

 

LARGE CLIP CONTAINED!

Copy to microP2 cards with capacity of 64 GB or more.

32 GB or less.

(CLIP NAME: XXXXXX)]

 

 

 

[INVALID VALUE!]

The data value you entered is invalid.

Enter data within the normal range.

[LACK OF CAPACITY!]

There is not enough recording capacity left on the card.

Insert a card with sufficient recording capacity.

[MISSING CLIP!]

Shot marks cannot be attached to the clips unless all clips

Insert all P2 cards over which recording extended.

recorded over multiple P2 cards are present.

 

 

[NO CARD!]

No P2 or SD memory card is inserted.

Insert the relevant media.

[NO COPY TO SAME CARD!]

A clip cannot be copied to the card storing the original clip.

Copy the selected clip to a card that does not contain the

original clip.

 

 

[NO FILE!]

The specified file does not exist.

Check the file.

[NO INPUT!]

No data is entered.

Enter data and then set.

[NO SD CARD!]

No SD memory card.

Insert an SD memory card.

[NOT SELECTED!]

Attempted to delete without selecting clips.

Select clips to delete.

 

Multiple instances of the same clip (copies) are included in the

Multiple instances of the same clip (copies) cannot be copied

[SAME CLIP IS SELECTED!]

simultaneously. Remove instances of the same clip from

 

clips selected.

selected items.

 

 

[TOO MANY CLIPS!]

Too many clips are selected.

Reduce the number of selected clips.

[UNKNOWN CONTENTS

This is a warning of the contents for the version that is not

Match the device and content versions.

FORMAT!]

supported by the camera.

 

 

The metadata character code is invalid.

The metadata character code is UTF-8. Enter valid characters

[UNKNOWN DATA!]

using a viewer.

 

 

There is a problem with data in the file.

Create the file again.

– 197 –