Chapter 2 Description of Parts — Power supply and accessory mounting section

16Cable holders

Used for clamping the light and microphone cables in place.

17Accessory mounting holes

Attach accessories. Do not use for purposes other than attaching accessories. ffMounting hole size

--1/4‑20 UNC (screw length 10 mm or shorter) --3/8‑16 UNC (screw length 10 mm or shorter)

18Light shoe

Attach the video light. ffMounting hole size

1/4‑20 UNC (screw length 6 mm or shorter)

19Viewfinder front/back position clamp lever

To adjust the front/back position of the viewfinder, loosen this lever, and slide the viewfinder to the left or right to adjust it to an easy-to-view position. After adjustment, turn in the <LOCK> direction and firmly clamp.

20Light output terminal

Connect the Ultralight 2 of Anton/Bauer (optional) or an equivalent video light of 50 W or under.

The battery charge level drops sharply when the light is illuminated. When using the light, using a battery of 90 Wh or more is recommended.

21Microphone holder mounting screws

Screws for mounting the microphone holder AJ‑MH800G (optional) or VF interface box AG‑YA500G (optional).

22<LENS> terminal (page 97)

Connect the lens connection cable. For details of the lens used, refer to the Operating Instructions for the lens.

– 16 –