Chapter 7 Menu
|
|
| |
[Q WIDTH] | [I WIDTH] |
|
|
|
|
| |
| + direction |
|
|
[I CENTER] |
|
|
|
- direction | [Q PHASE] |
| |
|
| Skin tone area | |
|
|
|
ffWhen saving or reading setup files from an SD memory card, you can save items with an [S] and items without an [S] separately. Items with an [S] in front of the item name are the targets for [PAINT([S]SELECT)] in the main menu → [FILE] → [SETUP DATA SELECT]. Items without an [S] are targets for [PAINT(LEVEL)].
[KNEE/LEVEL]
Item |
| Description of settings | Remark | ||
[MASTER PED] | Sets the master pedestal. |
|
|
| |
| [−200]…[16]…[200] |
|
|
| |
[[S] MANUAL KNEE] | Sets the mode when the <OUTPUT>/<AUTO KNEE> switch is <OFF>. This |
|
|
| |
| enables the [KNEE MASTER POINT]/[KNEE MASTER SLOPE] setting value |
|
|
| |
| when the switch is [ON]. |
|
|
| |
| [ON], [OFF] |
|
|
|
|
[KNEE MASTER | Sets the knee point position in 0.5% steps. | ffThe setting becomes invalid when [FILM‑REC] | |||
POINT] | [70.0%]…[93.0%]…[107.0%] | or [VIDEO‑REC] is selected in the main menu → | |||
|
|
| [PAINT] → [GAMMA] → [GAMMA MODE SEL]. | ||
[KNEE MASTER | Sets the knee inclination. | ffThe setting becomes invalid when [FILM‑REC] | |||
SLOPE] | [0]…[85]…[99] |
| or [VIDEO‑REC] is selected in the main menu → | ||
|
|
| [PAINT] → [GAMMA] → [GAMMA MODE SEL]. | ||
[[S] WHITE CLIP] | Turns the white clip function [ON]/[OFF]. This enables the [WHITE CLIP LVL] |
|
|
| |
| setting value when the function is [ON]. |
|
|
| |
| [ON], [OFF] |
|
|
|
|
[WHITE CLIP LVL] | Sets the white clip level. |
|
|
| |
| [90%]…[109%] |
|
|
|
|
[A.KNEE POINT] | Sets the auto knee point position in 1% steps. |
|
|
| |
| This is enabled when the <OUTPUT>/<AUTO KNEE> switch is <CAM>/<ON>. |
|
|
| |
| [80%]…[90%]…[107%] |
|
|
| |
[A.KNEE LVL] | Sets the auto knee level. |
|
|
| |
| [100]…[107]…[109] |
|
|
| |
[A.KNEE RESPONSE] | Sets the auto knee response speed. The smaller the setting value, the faster the |
|
|
| |
| response speed is. |
|
|
| |
| [1]…[4]…[8] |
|
|
|
|
[CHROMA LEVEL] | Sets the chroma level of PR and PB signals. |
|
|
| |
| When this is set to [OFF], the color components of the video signal are removed. |
|
|
| |
| [OFF], [−99%]…[0%]…[40%] |
|
|
| |
[DRS MODE] | Sets the effectiveness of DRS color preservation. |
|
|
| |
| [MODE1] | Sets the hue of |
|
|
|
| [MODE2] | Makes the hue of |
|
|
|
[DRS EFFECT | Sets the compression level for the |
|
|
| |
DEPTH] | value, the higher the compression level of |
|
|
| |
| [1], [2], [3] |
|
|
|
|
[[S] HI‑COLOR SW] | Turns the mode that expands the color dynamic range [ON]/[OFF]. |
|
|
| |
| [ON], [OFF] |
|
|
|
|
[HI‑COLOR LVL] | Selects the level of the mode that expands the color dynamic range. |
|
|
| |
| [1]…[32] |
|
|
|
|
|
|
|
|
| are factory settings. |
ffWhen saving or reading setup files from an SD memory card, you can save items with an [S] and items without an [S] separately. Items with an [S] in front of the item name are the targets for [PAINT([S]SELECT)] in the main menu → [FILE] → [SETUP DATA SELECT]. Items without an [S] are targets for [PAINT(LEVEL)].
[GAMMA]
Item | Description of settings | Remark | ||
[MASTER GAMMA] | Configure master gamma settings in 0.01 steps. |
|
|
|
| [0.30]…[0.45]…[0.75] |
|
|
|
[R GAMMA] | Sets the gamma of Rch. |
|
|
|
| [−15]…[0]…[15] |
|
|
|
[B GAMMA] | Sets the gamma of Bch. |
|
|
|
| [−15]…[0]…[15] |
|
|
|
|
|
|
| are factory settings. |