Chapter 9 Maintenance and Inspection — Inspections before shooting

7Set the <DISPLAY> switch to <UB>.

Check that each time the <HOLD> button is pressed, [VTCG] → [DATE] → [TIME] → no display (time zone) → [TCG] value is displayed and that this value is accurate.

If [DATE], [TIME], and the time zone is incorrect, set the correct date/time. (page 30).

@@NOTE

tt Note that date and time data based on [DATE], [TIME], and the time zone settings is recorded in the clip and affects the playback order in the thumbnail operations.

– 192 –