Chapter 9 Maintenance and
Warning content | There is an error in the fan and it stops. Otherwise [OPTION MENU] → [OPTION] → [FAN MODE] → [OFF] has been | |
set. | ||
| ||
Recording or playback operation | Operation will continue, but if the camera is operated with the fan stopped, the temperature rises and recording/playback | |
may not operate normally. | ||
| ||
Action to take | If the fan has stopped with error, stop using immediately and consult your dealer. | |
If the fan has stopped, temperature of the camera will rise. Therefore, do not use the camera for a long period of time. | ||
| Use the tripod, etc., and do not touch the camera directly. |
If errors occur on the camera for any cause, the following error code is displayed on the time code display in the display window. Check the types of warning, and deal with the error according to “Warnings description list” (page 194).
Code No. |
|
| Message display |
| Description | Type of warning | ||
|
| First row |
| Second row | ||||
|
|
|
|
|
| |||
[E‑30] |
| [TURN POWER OFF] |
| [P2 CARD] | P2 card removal error | 3 Card removal error | ||
[E‑31] |
| [TURN POWER OFF] |
| [SYSTEM MODE] | System mode error | 2 Mismatched format | ||
[E‑33] |
| [SYSTEM ERROR] |
| [CAMERA] | Camera unit error | 1 System error | ||
[E‑34] |
| [SYSTEM ERROR] |
| [LCD MICON] | LCD microcomputer error | 1 System error | ||
[E‑35] |
| [SYSTEM ERROR] |
| [CODEC] | Codec control error | 1 System error | ||
[E‑36] |
| [SYSTEM ERROR] |
| [P2 SYSTEM] | P2 system error | 1 System error | ||
[E‑37] |
| [SYSTEM ERROR] |
| [P2CS] |
| P2CS microcomputer error | 1 System error | |
[E‑39] |
| [SYSTEM ERROR] |
| [INITIALIZE] | Video initialization error | 1 System error | ||
[E‑63] |
| No display |
| No display | System control microcomputer error | 1 System error | ||
[E‑64] |
| [SYSTEM ERROR] |
| [FRAME SIGNAL] | Standard signal error | 1 System error | ||
| or no display |
| or no display | |||||
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
| Warning information display |
|
|
| |||||
|
|
|
|
|
|
|
| |
|
| Monitor display |
|
| Description | Camera operation | ||
First row |
| Second row |
| |||||
|
|
|
| |||||
|
|
|
|
|
| CPS authentication of microP2 memory card has failed. The microP2 |
| |
[AUTH NG CARD] (slot | None |
| memory card with CPS authentication failed cannot be recorded or | Continue | ||||
number) |
|
| played back. Select [AUTHENTICATE] in the main menu → [CLIP], | |||||
|
|
|
|
| ||||
|
|
|
|
|
| and enter the password. |
| |
|
|
|
|
|
| Displays any reduced voltage detected on the backup battery in the |
| |
[BACKUP BATT EMPTY] | None |
| internal clock when the power is turned on. | Continue | ||||
| Follow “Charging the | |||||||
|
|
|
|
|
|
| ||
|
|
|
|
|
| battery. |
|
|
|
|
|
|
|
| Displayed when an data error caused by the P2 card occurs during |
| |
[CARD ERROR] (slot |
|
|
| recording. |
|
| ||
None |
| Displayed after recording stops until the next operation. Also | Stop | |||||
number) |
|
| displayed for three seconds during playback when a P2 card error | |||||
|
|
|
|
| ||||
|
|
|
|
|
| causes playback to stop. |
| |
|
|
|
|
|
| Replace the P2 card of the slot where the error occurred. |
| |
[DIR NG CARD] (slot | None |
| The directory position is not correct. Make a card backup immediately | Continue | ||||
number) |
|
|
|
| and use again after formatting. |
| ||
|
|
|
|
|
| Displayed when the fan motor stops. |
| |
[FAN STOPPED] |
| None |
| The camera operates even if the fan stops. Refrain from using | Continue | |||
|
|
|
|
|
| immediately. |
|
|
[PB INTERMITTENT] |
|
|
| Playback is interrupted on the SDHC/SDXC memory card. A card |
| |||
None |
| whose playback performance cannot be assured is inserted. Use of | Continue | |||||
(slot number) |
|
| ||||||
|
|
|
| microP2 or P2 memory card is recommended. |
| |||
|
|
|
|
|
|
| ||
|
|
|
|
|
| Proxy error |
|
|
[PROXY ERROR] |
| None |
| For details, refer to “Error displays about proxy data recordings” | Continue | |||
|
|
|
|
|
| (page 43). |
|
|
[PROXY REC |
|
|
|
| Proxy error |
|
| |
| None |
| For details, refer to “Error displays about proxy data recordings” | Continue | ||||
WARNING] |
|
| ||||||
|
|
|
| (page 43). |
|
| ||
|
|
|
|
|
|
|
| |
|
|
|
|
|
| An SDHC/SDXC memory card is inserted into the microP2 memory |
| |
[REC IMPOSSIBLE] (slot | None |
| card slot. |
| Continue | |||
number) |
|
|
|
| Recording to the SDHC/SDXC memory card is disabled. Record to |
| ||
|
|
|
|
|
| microP2 or P2 memory cards. |
| |
|
|
|
|
|
| Displayed when a video or audio error occurs during recording. Turn |
| |
[REC WARNING] |
| [FRAME SIGNAL] |
| the power off and on before using it again. | Continue | |||
|
| When input signals are disrupted, recording continues while disrupted | ||||||
|
|
|
|
|
| images are recorded. Check the signal to be input to the camera. |
| |
|
|
|
|
|
| Displayed when attempting to record in excess of the maximum total |
| |
[REC WARNING] |
| [OVER MAX# CLIPS] | number of clips allowed for one P2 card. | Stop | ||||
|
|
|
|
|
| Replace the P2 card or delete unnecessary clips. |
| |