Panasonic AJ-PX5000G manual 155

Chapter 7 Menu Operations — Menu list

Item		Description of settings	Remark
[HOLD]	Selects whether to hold [RECORDING] settings.
	[ON]	Holds.
	[OFF]	Does not hold. It will always be [NORMAL] the next time that
		power is turned on.
[PRE REC]	Selects whether to perform pre-recording. Sets the time to perform continuous		ff[ON] cannot be selected in the following cases:
	pre-recording when [ON] is selected.		- When the main menu → [SYSTEM] →
			[SYSTEM MODE] → [LINE&FREQ] is set to
			[1080‑59.94P] or [1080‑50P]
			- When the main menu → [SYSTEM] →
	[ON]	Performs pre-recording.	[SYSTEM MODE] → [REC SIGNAL] is set to
			[SDI]
			- When the main menu → [REC/PB] → [REC
	[OFF]	Does not perform pre-recording.
			FUNCTION] → [RECORDING] is set to other
			than [NORMAL]
[PRE REC TIME]	Configures pre-recording settings.
	Sets a time that can be recorded by counting backward from the time that the
	<REC> button is pushed.
	Up to a maximum of 15 seconds can be selected in DVCPRO and DV modes, and
	up to 8 seconds in other modes.
	HD, DVCPRO50: [0s]…[8s]
	DV or DVCPRO: [0s]…[8s]…[15s]
				are factory settings.
[REC/PB SETUP]
Item		Description of settings	Remark
[REC MEDIA]	Selects the slot for the media to be recorded.		ffRecording is not possible when a card is inserted
	[P2]	Uses P2 memory cards (slots 1 and 2).	into a slot that is not selected.
	[microP2]	Uses microP2 memory cards (slots 3 and 4).
[FILE SPLIT]	Selects whether to divide the recording file in 4 GB units or one file when		ffIf done in one file, that clip cannot be copied to a
	recording in the microP2 memory card (that exceeds 32 GB) in AVC‑LongG		P2 memory card or 32 GB microP2 memory card,
	format.		or copied or exported to storage.
	[ONE FILE]	Records in 1 file.
	[SPLIT]	Divides in 4 GB units.
[START TEXT MEMO]	Selects the function that automatically adds a text memo at recording start		ffText memos added when this item is [ON] indicate
	position each time recording is started.		the recording start position. To record text memos
	[ON]	A text memo is added to each recording.	as character information, refer to “Setting clip
			metadata” (page 116).
	[OFF]	Does not add a text memo.
[P.ON REC SLOT	Selects the slot order targeted for recording when power is turned on.
SEL]	[HOLD]	Records from the recording slot used the last time power was
		turned off.
	[SLOT 1/3]	Each time the power is turned on, this changes in order from
		slot 1 or 3 (slot selected in [REC MEDIA]) to the recording
		target card.
[REC START]	Selects acceptance of the start of recording.		ffIf the main menu → [REC/PB] → [REC
	[ALL]	Accepts start of recording during stop, during recording pause,	FUNCTION] → [RECORDING] is set to other than
			[NORMAL], operation will be [NORMAL] even
		and during playback.
			when this item is set to [ALL].
	[NORMAL]	Accepts start of recording during stop and during recording
		pause.
[REC TALLY]	Selects the method to display recording status at the camera.		ffIf set [GREEN] or [CHAR], the viewfinder front
	[RED]	The red tally lamp lights.	tally lamp, back tally lamp and rear tally lamp do
			not light while this camera is recording.
	[GREEN]	The green tally lamp lights.
	[CHAR]	The characters “REC” are displayed in the viewfinder.
[ACCESS LED]	Selects whether to light the access LED of the P2 card.
	[ON]	Lights.
	[OFF]	Does not light.
[SEEK POS SEL]	Selects the position to move when the <FF/REW> button is pressed while
	playback is paused.
	[CLIP]	Top of the clip
	[CLIP&TEXT	Top of the clip and text memo location
	MEMO]
				are factory settings.

– 155 –