Chapter 4 Adjustments and Settings for
When the level adjustment dial is assigned to [CH1/2]
rr Selection of level adjustment of channels 1/2
For the level adjustment method of channels 1/2, select <AUTO> (automatic adjustment) or <MANU> (manual adjustment by adjustment dial) by the <AUDIO SELECT CH1/3>/<AUDIO SELECT CH2/4> switch.
When <MANU> is selected, the volume of channels 1/2 is adjusted by the <AUDIO LEVEL CH1/3>/<AUDIO LEVEL CH2/4> dial.
rr Adjustment by <AUDIO LEVEL CH1/3>/<AUDIO LEVEL CH2/4> dial
Adjustment the <AUDIO LEVEL CH1/3>/<AUDIO LEVEL CH2/4> dial while viewing the audio channel level meter in the display window or the audio level meter in the LCD monitor. When the topmost bar (0 dB) is exceeded, the [OVER] display is illuminated to indicate that input audio is excessive. The maximum level must be adjusted so that the display does not reach 0 dB.
rr Adjustment by <F.AUDIO LEVEL> dial
When operating the camera alone, we recommend using the <F.AUDIO LEVEL> dial to adjust the audio level. Select the audio channel to be adjusted in advance, and while viewing the level meter of the viewfinder screen, adjust the level by the <F.AUDIO LEVEL> dial so that input does not become too great.
When adjusting the recording level by the <F.AUDIO LEVEL> dial, perform the following operation. Select whether to enable [FRONT VR CH1] and [FRONT VR CH2] on the line selected as the input signal of each channel in the main menu → [I/F SETUP] → [MIC/AUDIO].
[OFF]: Disabled
[FRONT]: Enabled when <FRONT> is selected for the input signal
[W.L.]: Enabled when wireless is selected for the input signal
[REAR]: Enabled when <REAR> is selected for the input signal
[ALL]: Enabled on all input lines
rr Level adjustment of channels 3/4
Automatic adjustment is enabled when [AUTO LVL CH3] and [AUTO LVL CH4] are set to [ON] in the main menu → [I/F SETUP] → [MIC/AUDIO]. When these items are set to [OFF], automatic adjustment stops functioning, and the audio level can be adjusted by [LVL CONTROL CH3] and [LVL CONTROL CH4] in [MIC/AUDIO].
When the level adjustment dial is assigned to [CH3/4]
rr Selection of level adjustment of channels 3/4
For the level adjustment method of channels 3/4, select <AUTO> (automatic adjustment) or <MANU> (manual adjustment by adjustment dial) by the <AUDIO SELECT CH1/3>/<AUDIO SELECT CH2/4> switch.
When <MANU> is selected, the volume of channels 3/4 is adjusted by the <AUDIO LEVEL CH1/3>/<AUDIO LEVEL CH2/4> dial.
rr Adjustment by <AUDIO LEVEL CH1/3>/<AUDIO LEVEL CH2/4> dial
Adjustment is possible by the <AUDIO LEVEL CH1/3>/<AUDIO LEVEL CH2/4> dial in the same way as when the level adjustment dial is assigned to [CH1/2].
rr Level adjustment of channels 3/4
Automatic adjustment is enabled when [AUTO LVL CH1] and [AUTO LVL CH2] are set to [ON] in the main menu → [I/F SETUP] → [MIC/AUDIO]. When these items are set to [OFF], automatic adjustment stops functioning, and the audio level can be adjusted by [LVL CONTROL CH1] and [LVL CONTROL CH2] in [MIC/AUDIO].
Selection of adjustment method
rr When [CH1/2] is selected by [VR SELECT]
Channel 1, channel 2 |
| Channel 3, channel 4 | ||
<AUDIO SELECT CH1/3> switch | Adjustment method | [AUTO LVL CH3] |
| Adjustment method |
<AUDIO SELECT CH2/4> switch | [AUTO LVL CH4] |
| ||
|
|
| ||
<MANU> | Manual adjustment by adjustment | [OFF] |
| Manual adjustment by [LVL CONTROL |
dial |
| CH3], [LVL CONTROL CH4] | ||
|
|
| ||
<AUTO> | Automatic adjustment | [ON] |
| Automatic adjustment |