Chapter 7 Menu
Item |
|
| Description of settings |
| Remark | ||||||
[GAMMA MODE SEL] | Selects the gamma curve. |
|
| ffWhen [FILMLIKE3] is used, it is recommended to | |||||||
| [HD] | The video gamma feature for HD (High Definition). | configure the following settings at the main menu | ||||||||
| → [PAINT] → [KNEE/LEVEL]. | ||||||||||
| [SD] | Increases gain in darker areas more than HD gamma. | |||||||||
| - [[S] MANUAL KNEE]: [ON] | ||||||||||
| [FILMLIKE1] | Feature that reproduces more highlight areas compared to HD | |||||||||
| - [KNEE MASTER POINT]: [85.0%] | ||||||||||
|
| gamma. |
|
| - [KNEE MASTER SLOPE]: [50] | ||||||
| [FILMLIKE2] | Feature that reproduces more highlight areas compared to | ffIf set [FILM‑REC] or [VIDEO‑REC], auto knee is | ||||||||
|
| [FILMLIKE1]. |
|
| disabled. | ||||||
| [FILMLIKE3] | Feature that reproduces more highlight areas compared to | ffAuto knee is disabled if the remote control | ||||||||
|
| [FILMLIKE2]. |
|
| unit (AJ‑RC10G) is connected, but when the | ||||||
|
|
|
|
|
|
|
| AJ‑RC10G <A.KNEE ON> button is pressed, the | |||
| [FILM‑REC] | The | |||||||||
| LED of <A.KNEE ON> button lights. | ||||||||||
| [VIDEO‑REC] | The | |||||||||
|
|
|
|
| |||||||
[F‑REC DYNAMIC | When [FILM‑REC] is selected in [GAMMA MODE SEL], dynamic range is set. If an |
|
|
|
| ||||||
LVL] | item other than [FILM‑REC] is selected, no settings are changed. |
|
|
|
| ||||||
| [200%], [300%], [400%], [500%], [600%] |
|
|
|
|
|
|
| |||
[F‑REC BLACK STR | When [FILM‑REC] is selected in [GAMMA MODE SEL], black stretch is set. If an |
|
|
|
| ||||||
LVL] | item other than [FILM‑REC] is selected, no settings are changed. |
|
|
|
| ||||||
| [0%]…[30%] |
|
|
|
|
|
|
|
|
|
|
[V‑REC KNEE | When [VIDEO‑REC] is selected in [GAMMA MODE SEL], knee slope is set. If an |
|
|
|
| ||||||
SLOPE] | item other than [VIDEO‑REC] is selected, no settings are changed. |
|
|
|
| ||||||
| [150%], [200%], [250%], [300%], [350%], [400%], [450%], [500%] |
|
|
|
| ||||||
[V‑REC KNEE POINT] | When [VIDEO‑REC] is selected in [GAMMA MODE SEL], knee point is set. If an |
|
|
|
| ||||||
| item other than [VIDEO‑REC] is selected, no settings are changed. |
|
|
|
| ||||||
| [30%]…[107%] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| are factory settings. |
|
|
|
|
|
| [FILMLIKE1] |
|
|
|
| |
|
|
|
|
|
|
|
|
|
| ||
|
|
|
| [SD] |
| ||||||
|
|
|
| [FILMLIKE3] |
|
|
|
| |||
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
| |||||
| Image level |
|
|
| [FILMLIKE2] |
|
|
|
| ||
|
|
|
|
|
|
|
|
|
| ||
|
|
|
| [HD] |
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Luminosity |
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
[[S] CAMERA SETTING] |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
| ||||||
Item |
|
| Description of settings |
| Remark | ||||||
[SHOOTING MODE] | Selects the shooting mode according to the shooting environment. | ffIf [NORMAL] is selected, [−6dB] cannot be | |||||||||
| [NORMAL] | Selects normal sensitivity. (Applies during shooting in normal | assigned to <LOW>/<MID>/<HIGH> on the | ||||||||
| <GAIN> switch. | ||||||||||
|
| brightness.) |
|
| |||||||
|
|
|
|
|
|
|
| ||||
| [HIGH SENS.] | Selects |
|
|
|
| |||||
|
| environment.) |
|
|
|
|
|
| |||
|
| [H.SENS.] is displayed on the viewfinder screen. |
|
|
|
| |||||
[DETAIL] | Switches the detail signal [ON]/[OFF]. |
|
|
|
|
|
| ||||
| [ON], [OFF] |
|
|
|
|
|
|
|
|
|
|
[2D LPF] | Sets a 2D |
|
| ffOperates during 480/59.94i only. | |||||||
| [ON] | Reduces cross colors. |
|
|
|
|
|
| |||
| [OFF] | Does not reduce cross colors. |
|
|
|
| |||||
[GAMMA] | Enables/disables gamma correction. |
|
|
|
|
|
| ||||
| [ON], [OFF] |
|
|
|
|
|
|
|
|
|
|
[TEST SAW] | Enables/disables the test signal. |
|
|
|
|
|
| ||||
| [ON], [OFF] |
|
|
|
|
|
|
|
|
|
|
[FLARE] | Enables/disables flare correction. |
|
|
|
|
|
| ||||
| [ON], [OFF] |
|
|
|
|
|
|
|
|
|
|
[H‑F COMPE.] | Enables/disables aperture correction. |
|
|
|
|
|
| ||||
| [ON], [OFF] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| are factory settings. |
ffAll [[S] CAMERA SETTING] items are targets of [PAINT([S]SELECT)] in the main menu → [FILE] → [SETUP DATA SELECT].