| Chapter 6 Thumbnail Operations for |
|
|
[THUMBNAIL] | Displays the location of the frame (frame offset) and the size (height and width) of the image selected as the thumbnail image. |
[PROXY] | Displays information such as proxy format when proxy is added. |
*1 You can select the [USER CLIP NAME] recording method. For details, refer to “Selecting the [USER CLIP NAME] recording method” (page 117).
*2 When entering [MEMO], make sure to enter [TEXT]. It is not possible to record only [PERSON] (the person inputting the memo), or [OFFSET] (the recording position).
Checking and modifying uploaded metadata
Details of metadata uploaded from an SD memory card can be checked.
Fig. 1 | Fig. 2 |
1Select [PROPERTY] in the main menu → [REC/PB] → [REC METADATA]. The metadata list is displayed.
2 Use the cursor buttons to move the cursor over the item to be checked, and press the <SET> button. (Fig. 1)
Settings of the uploaded metadata can be checked.
3While checking the settings for the metadata, use the cursor buttons to move the cursor over the item where you want to change the setting, and press the <SET> button.
ffA software keyboard screen is displayed, allowing you to modify the setting. (Fig. 2)
ffWhile holding down the <SHIFT> button, press the cursor buttons (`/{) to move to the beginning or end of the setting details to be changed.
Setting whether to record the uploaded metadata
Set [ON]/[OFF] in the main menu → [REC/PB] → [REC METADATA] → [RECORD]. This item is set to [OFF] in the factory settings.
Selecting the [USER CLIP NAME] recording method
In the main menu → [REC/PB] → [REC METADATA] → [USER CLIP NAME], select the [USER CLIP NAME] recording method from either [TYPE1] or [TYPE2].
rr [TYPE1] (factory settings)
Status of clip metadata | [USER CLIP NAME] to be recorded |
When clip metadata has been loaded | Uploaded data |
When no clip metadata has been loaded, or when setting disables recording of loaded clip | Same as [GLOBAL CLIP ID] |
metadata |
|