Chapter 7 Menu
Item |
|
| Description of settings | Remark | ||
[TC OUTPUT REF] |
| Sets the output delay of time code output from the <TC OUT> terminal. |
|
|
| |
|
| For details, refer to “Externally locking the time code” (page 65). |
|
|
| |
|
| [TC IN] | Match to external time code input. |
|
|
|
|
| [VIDEO OUT] | Match to output images. |
|
|
|
[REC CHECK |
| Selects whether to regenerate to the time code last recorded to the P2 card at the |
|
|
| |
REGEN] |
| next recording when the <RET> button that assigns recording check function or |
|
|
| |
|
| the <USER> button is pressed. |
|
|
| |
|
| [ON] | Regenerates. |
|
|
|
|
| [OFF] | Does not regenerate. |
|
|
|
|
|
|
|
|
| are factory settings. |
|
|
|
|
|
|
|
[REC METADATA] |
|
|
|
|
| |
|
|
|
| |||
Item |
|
| Description of settings | Remark | ||
[LOAD] |
| Loads the metadata upload file saved to the SD memory card. |
|
|
| |
[RECORD] |
| Sets whether to add loaded metadata at a recording. |
|
|
| |
|
| [ON] | Adds. |
|
|
|
|
| [OFF] | Does not add. |
|
|
|
[USER CLIP NAME] |
| Sets data to be recorded to [USER CLIP NAME]. |
|
|
| |
|
| When [RECORD] is [ON]: |
|
|
| |
|
| [TYPE1] | Records setting values of the loaded data. |
|
|
|
|
| [TYPE2] | Records loaded data and counter values. |
|
|
|
|
| When [RECORD] is [OFF]: |
|
|
| |
|
| [TYPE1] | Records the same value as [GLOBAL CLIP ID]. |
|
|
|
|
| [TYPE2] | Records the same value as [CLIP NAME]. |
|
|
|
[INITIALIZE] |
| Deletes all loaded metadata and initializes. |
|
|
| |
[PROPERTY] |
| Checks and corrects loaded metadata. | ffThis item is enabled while the thumbnail is | |||
|
|
|
| displayed. | ||
[LANGUAGE] |
| Sets the language used to display metadata. | ffThis items is displayed when [NTSC (J)] is | |||
|
| [ENGLISH], [JAPANESE] | selected in [OPTION MENU] → [AREA SETTING]. | |||
|
|
|
|
|
| are factory settings. |
|
|
|
|
|
|
|
| [I/F SETUP] |
|
|
|
|
| |
|
|
|
|
|
|
|
[OUTPUT SEL] |
|
|
|
|
| |
|
|
|
| |||
Item |
|
| Description of settings | Remark | ||
[OUTPUT ITEM] |
| Sets the character content to superimpose on the output signal of the <SDI | ffThe time code display position moves up and | |||
|
| OUT1> terminal and monitor output terminal (<SDI OUT2>, <HDMI OUT>, and | down based on the camera ID position. | |||
|
| <VIDEO OUT>). |
|
|
|
|
|
| [MENU ONLY] | Displays only on the menu. Normally, nothing is displayed. |
|
|
|
|
| [TC] | Displays the time code. (Menu is displayed on the menu) |
|
|
|
|
| [STATUS] | Displays all items that are the same as the character displayed |
|
|
|
|
|
| on the viewfinder. (Menu is displayed on the menu) |
|
|
|
[SDI OUT1] |
| Turns <SDI OUT1> terminal output [ON]/[OFF]. |
|
|
| |
|
| [ON] | Performs output. |
|
|
|
|
| [OFF] | Stops output. |
|
|
|
[SDI OUT1 MODE] |
| Selects <SDI OUT1> terminal output signals. |
|
|
| |
|
| [MEM] | In playback mode, these are playback images. |
|
|
|
|
| [CAM] | When the main menu → [SYSTEM] → [SYSTEM MODE] |
|
|
|
|
|
| → [REC SIGNAL] is set to [CAM], output is always camera |
|
|
|
|
|
| images. |
|
|
|
[SDI OUT1 CHAR] |
| Selects whether to superimpose characters on <SDI OUT1> terminal output | ffThe content of characters to superimpose is the | |||
|
| images. |
| same as the characters superimposed on images | ||
|
| [ON] | Superimposes. | output from <SDI OUT2> and other terminals. | ||
|
|
|
|
| ||
|
| [OFF] | Does not superimpose. |
|
|
|
[SDI OUT2] |
| Turns <SDI OUT2> terminal output [ON]/[OFF]. |
|
|
| |
|
| [ON] | Performs output. |
|
|
|
|
| [OFF] | Stops output. |
|
|
|
[VIDEO OUT] |
| Turns <VIDEO OUT> terminal output [ON]/[OFF]. |
|
|
| |
|
| [ON] | Performs output. |
|
|
|
|
| [OFF] | Stops output. |
|
|
|
|
|
|
|
|
| are factory settings. |