Chapter 6 Thumbnail Operations for
<SET>
<EXIT>
1Open the explorer screen.
Partitions or folders are displayed in a list.
2 Use the cursor buttons to place the cursor on the partition or folder you want to display on the thumbnail screen, and press the <SET> button.
This displays the thumbnails of clips in the partition or folder. You can go back to the main explorer screen by clicking the <EXIT> button.
@@NOTE
tt When target partitions are selected, you can display thumbnails in all partitions selected as targets by pressing <SHIFT> + <SET> buttons.
rr Information display items
1
2
1Clip information Clip properties display
2Storage device information For [TYPE S]
| [SERIAL] | P2 card serial number |
| [MODEL] | P2 card model name |
| [SELECTED PART.] | Displays a checkmark when a target partition is selected |
| [SELECTED PART. NO.] | List of selected partition numbers (only displayed when multiple partitions are selected) |
| [NO.] | Partition number |
| [DATE] | Partition record date |
| [TIME] | Partition record time |
| [VERIFY] | Verification settings and results during recording, [ON/FAILED] |
|
| ff[ON/FAILED]: Verification performed. Items match. |
|
| ff[ON/FINISHED]: Verification performed but no match found. (For [P2STORE], [−−] is displayed.) |
|
| ff[OFF]: Verification not performed |
| [NAME] | Partition name defined by the user |
| [SIZE] | Total capacity of the storage device |
| [USED] | Used storage device capacity |
| [FREE CAP.] | Remaining storage device capacity |
For [FAT] |
| |
|
|
|
| [SELECTED PART.] | Displays a checkmark when a target partition is selected |
| [SELECTED PART. NO.] | List of selected folder numbers (only displayed when multiple folders are selected) |
| [NO.] | Folder number |
| [DATE] | Folder creation date |
| [TIME] | Folder creation time |
| [FOLDER] | Folder name (creation date and time are not displayed in the root folder) |
| [SIZE] | Total capacity of the storage device |