Chapter 4 Adjustments and Settings for
Eight lens files stored to internal memory on the camera can be written to SD memory card as a card file with a single title. Eight titles can be written to SD memory card. Lens files written to SD memory card can be read to internal memory as a written title (containing eight lens files).
The following shows the relationship between lens files stored to internal memory and lens files written to SD memory card.
Internal memory
8 lens files
Up to eight lens files can be stored in internal memory.
The contents of the eight lens files can be written to and read from SD memory cards as a card file with a single title.
Card file |
|
|
|
Title 1 | Title 2 | Title 3 | Title 4 |
Eight lens files⋅8 = 64 lens files can be written.
Title 5 | Title 6 | Title 7 | Title 8 |
Writing lens files to SD memory card
Fig. 1 | Fig. 2 |
1Select [SAVE] in the main menu → [FILE] → [LENS FILE (SD CARD)], and press the jog dial button (or <SET> button). (Fig. 1) The list of lens files currently saved in camera memory is displayed.
2 Select the file to write from the file list. (Fig. 2)
The title entry screen and keyboard are displayed.
3Enter the desired characters with the keyboard.
4Use the jog dial button (or cursor buttons `/{/Y/I) to select [OK], and press the jog dial button (or <SET> button). The confirmation screen is displayed.
5Select [YES], and press the jog dial button (or <SET> button).
The file is saved and the file list is updated.
For details on error messages if an error message is displayed, refer to “Warning/error displays in the thumbnail operation, menu operation, and USB storage mode” (page 197).
Reading lens files from SD memory card
1Select [LOAD] in the main menu → [FILE] → [LENS FILE (SD CARD)], and press the jog dial button (or <SET> button). The list of lens files currently saved in camera memory is displayed.
2 Select the file name to read, and press the jog dial button (or <SET> button).
The confirmation screen is displayed.
3Select [YES], and press the jog dial button (or <SET> button). Loading of the file begins.