Chapter 2 Description of Parts — Description on display window

Description on display window

3

1 2

rr P2 card, battery charge level, audio level display

1Media remaining space indicator bar

Indicates the remaining free space in the P2 card using a 7-segment display.

The P2 card remaining time indicated by a single segment is set in three or five minutes in the main menu → [I/F SETUP] → [BATTERY/P2CARD] → [CARD REMAIN/Seg]. Segments go out one segment at a time at each preset time.

2Battery charge level indicator bar

When a battery with a digital indication (% indication) is used, all seven segments up to the [F] position light if the battery charge level is 70% or higher.

When the battery charge level falls below 70%, the segments go out one by one for each 10% drop. When set [100%] in the main menu → [I/F SETUP] → [BATTERY/P2CARD] → [BATT REMAIN FULL], seven segments can be set to light at 100%.

3Audio channel level meter

When the audio channel selector switch is set to <CH1/2>, audio channel display numbers 1 and 2 are displayed, and the audio level of CH1 and CH2 is displayed. When <CH3/4> is set, audio channel display numbers 3 and 4 are displayed, and the audio level of CH3 and CH4 is displayed.

4

5

rr Memory operation/status related display

4Error code display (page 196)

5 Information display

[LOOP] Lights during loop recording, and flashes during recording standby. (page 38)

7

6

6Time code indications

[NDF]

Indicates when the time code is in the non-drop frame mode.

[DF]

Indicates when the time code is in the drop frame mode.

[SLAVE]

Indicates when the time code is externally locked.

[HOLD]

Indicates when the time code generator/read value is held.

[CTL]

Lights when <CTL> is selected by the <DISPLAY> switch and the CTL count value is displayed.

[TCG]

Lights when <TC> (or <UB>) is selected by the <DISPLAY> switch and the TC (or UB) generator value is displayed.

[TC]

Lights when <TC> (or <UB>) is selected by the <DISPLAY> switch and the TC (or UB) reader value is displayed.

[VTCG]

Lights when <UB> is selected by the <DISPLAY> switch and the VIUB generator value is displayed.

[VTC]

Lights when <UB> is selected by the <DISPLAY> switch and the VIUB reader value is displayed.

[TIME]

Lights when <UB> is selected by the <DISPLAY> switch and the real time hours/minutes/seconds value is displayed.

– 27 –