Chapter 4 Adjustments and Settings for
2 Select the file to write from the list.
The title entry screen and keyboard are displayed.
3Enter the desired characters with the keyboard.
4Use the jog dial button (or cursor buttons `/{/Y/I) to select [OK], and press the jog dial button (or <SET> button). The confirmation screen is displayed.
5Select [YES], and press the jog dial button (or <SET> button). The file is saved and the file list is updated.
Reading setting data for scene files
1Select [LOAD] in the main menu → [FILE] → [SCENE], and press the jog dial button (or <SET> button). The list of scene files currently saved in camera memory is displayed.
2 Select the file name to load, and press the jog dial button (or <SET> button).
The confirmation screen is displayed.
3Select [YES], and press the jog dial button (or <SET> button). Loading of the file begins.
4When the completion message is displayed, press the jog dial button (or <SET> button).
Initializing (clearing) setting data for scene files
1Select [CLEAR] in the main menu → [FILE] → [SCENE], and press the jog dial button (or <SET> button). The list of scene files currently saved in camera memory is displayed.
2 Select the file name to delete, and press the jog dial button (or <SET> button).
The confirmation screen is displayed.
3Select [YES], and press the jog dial button (or <SET> button). Deletion (clearing) of the file begins.
How to restore menu setting status to factory setting valuesThe menu setting status on the camera can be returned to factory setting status.
1Select [LOAD FACTORY DATA] in the main menu → [FILE] → [INITIALIZE], and press the jog dial button (or <SET> button).
The confirmation screen is displayed.
If [SYSTEM RESTART] is displayed on the confirmation screen, the camera will restart after reading out is complete.
2 Select [YES], and press the jog dial button (or <SET> button).
Reading out of data for the factory setting begins.
@@NOTE
tt Data scene files and lens files and data saved as user data is not deleted by performing this operation.
Lens fileEight lens files are stored to internal memory on the camera.
Eight titles (total 64) of lens files can be written to SD memory cards with eight lens files saved as a single title. The following data is recorded to lens files:
ffTitle name
ffWhite shading compensation values ffFlare compensation values
ffRB gain offset compensation values
How to create lens files
Adjusting the white shading
For details on adjusting white shading, refer to “White shading compensation” (page 98).
Adjusting flare
Adjust flare by [LENS R FLARE], [LENS G FLARE] and [LENS B FLARE] in the main menu → [MAINTENANCE] → [LENS FILE ADJ].
Adjusting RB gain offset
Compensate for changes in white balance that occur when the lens is replaced.
1Mount the lens to be used as a reference on the camera.
2 Shoot a grayscale chart under appropriate lighting (2000 lx or 3200 K preferred).
3Set the <WHITE BAL> switch to <A>.