Panasonic AJ-PX5000G manual 160

Chapter 7 Menu Operations — Menu list

[GENLOCK]

Item		Description of settings	Remark
[GENLOCK]	Switches the synchronization signal of the camera signal.		ffWhen the main menu → [SYSTEM] → [SYSTEM
	[INT]	Synchronizes to the internal standard signal independent of	MODE] → [REC SIGNAL] is set to [SDI], the
			camera synchronizes to the reference signal input
		standard signals input to the <GENLOCK IN> terminal or <SDI
			to the <SDI IN> terminal regardless of this setting.
		IN> terminal.
	[GL IN]	Synchronizes to the standard signal input to the <GENLOCK
		IN> terminal.
	[SDI IN]	Synchronizes to the standard signal input to the <SDI IN>
		terminal.
[GL PHASE]	Selects the output signal of phase to be locked to the signal input to the
	<GENLOCK IN> terminal. (at 1080/59.94i, 1080/50i only)
	[HD SDI]	Locks the HD SDI output signal to generator lock input. The
		video start position of the down converter output signal lags by
		approx. 90 lines.
	[COMPOSITE]	Locks the down converter output signal to generator lock input.
		The video start position of the HD SDI output signal advances
		by approx. 90 lines.
[H PHASE COARSE]	Roughly adjusts to match horizontal synchronization phase when building a
	system.
	[−100]…[0]…[100]
[H PHASE FINE]	Minutely adjusts to match horizontal synchronization phase when building a
	system.
	[−100]…[0]…[100]
				are factory settings.
[MIC/AUDIO]
Item		Description of settings	Remark
[VR SELECT]	Selects which channel to assign to the <AUDIO LEVEL CH1/3>/<AUDIO LEVEL		ffWhen [CH3/4] is selected in [VR SELECT],
	CH2/4> and <F.AUDIO LEVEL> dials.		channels are also replaced for the following six
			items.
	[CH1/2]	Assigns level adjustment of channels 1/2. Channels 3/4 can be
			- [FRONT VR CH1] → [FRONT VR CH3]
		automatically adjusted or adjusted by [LVL CONTROL CH3] or
			- [FRONT VR CH2] → [FRONT VR CH4]
		[LVL CONTROL CH4].
			- [AUTO LVL CH3]→[AUTO LVL CH1]
			- [AUTO LVL CH4]→[AUTO LVL CH2]
	[CH3/4]	Assigns level adjustment of channels 3/4. Channels 1/2 can be
			- [LVL CONTROL CH3] → [LVL CONTROL CH1]
		automatically adjusted or adjusted by [LVL CONTROL CH1] or
			- [LVL CONTROL CH4] → [LVL CONTROL CH2]
		[LVL CONTROL CH2].
			For details, refer to “Adjusting the recording
			levels” (page 58).
[FRONT VR	Sets whether to enable the <F.AUDIO LEVEL> dial for input signals selected in		ffThe channel is replaced when [CH3/4] is selected
CH1(CH3)]	audio CH1 (CH3).		in [VR SELECT]. Setting values are inherited
	[FRONT]	Enabled only when [FRONT] is selected.	between replaced channels.
	[W.L.]	Enabled only when wireless microphone receiver is selected.
	[REAR]	Enabled only when [REAR] is selected.
	[ALL]	Enabled when any input is selected.
	[OFF]	Disabled regardless of the input selected. Recording levels do
		not change even if the volume dial is turned.
[FRONT VR	Sets whether to enable the <F.AUDIO LEVEL> dial for input signals selected in		ffThe channel is replaced when [CH3/4] is selected
CH2(CH4)]	audio CH2 (CH4).		in [VR SELECT]. Setting values are inherited
	[FRONT]	Enabled only when [FRONT] is selected.	between replaced channels.
	[W.L.]	Enabled only when wireless microphone receiver is selected.
	[REAR]	Enabled only when [REAR] is selected.
	[ALL]	Enabled when any input is selected.
	[OFF]	Disabled regardless of the input selected. Recording levels do
		not change even if the volume dial is turned.
[AUTO LVL	Selects whether to automatically adjust the level adjustment method for audio		ffThe channel is replaced when [CH3/4] is selected
CH3(CH1)]	CH3 (CH1).		in [VR SELECT]. Setting values are inherited
	[ON]	Automatic adjustment is enabled.	between replaced channels.
	[OFF]	Automatic adjustment is disabled. Can be adjusted using [LVL
		CONTROL CH3(CH1)] at this time.
[AUTO LVL	Selects whether to automatically adjust the level adjustment method for audio		ffThe channel is replaced when [CH3/4] is selected
CH4(CH2)]	CH4 (CH2).		in [VR SELECT]. Setting values are inherited
	[ON]	Automatic adjustment is enabled.	between replaced channels.
	[OFF]	Automatic adjustment is disabled. Can be adjusted using [LVL
		CONTROL CH4(CH2)] at this time.
[LVL CONTROL	Can be manually adjusted with this item when automatic level adjustment of audio		ffThe channel is replaced when [CH3/4] is selected
CH3(CH1)]	CH3 (CH1) is [OFF].		in [VR SELECT]. Setting values are inherited
	[0]…[70]…[100]		between replaced channels.

are factory settings.

– 160 –