RIO Remote I/O System User Guide
Installing RIO under Windows NT
Page 100
Chapter 2 Installing hardware and software
The Set Device Name window is now displayed.
7. In the Set Device name window, change the device name as required and click on the
Apply button.
8. In the Remote Terminal Adaptor Configuration window, click on the Apply button to effect
your settings.
Hint
We recommend using COM as the default port prefix. Any change that you do make
will only affect ports configured subsequently to the change.
To quicken the naming of ports in the Remote Terminal Adaptor Configuration
window select the Enumerate button. This action will allow you to number all
the remaining ports sequentially, using the currently selected port as the
starting number.