RIO Remote I/O System User Guide
Installing RIO under SCO UnixWare
Page 78
Chapter 2 Installing hardware and software
Installing device drivers and utilities
To install the RIO device drivers and utilities for the SCO UnixWare operating system
proceed as follows;
1. Login to your s ystem as root.
2. Load the CDROM into your s ystem CD drive.
3. Mount the CDROM by typ ing the following at the command prompt;
mount -r -Fcdfs -0 nmconv=c /dev/cdrom/cdrom1 /mnt
4. Press the Enter key.
5. At the command pr ompt, type
pkgadd -d /mnt/drivers/rio/unixware/riouw.pkg rio and then press the Enter key.
A series of progress messages is now displayed finis hing with thew command prompt.
6. Reboot your syste m.
The RIO device drivers and utilities for the SCO UnixWare are now installed and activated.
Note
The exact syntax of this command may differ slightly on different versions of SCO
UnixWare. For details of exact syntax, please consult the documentation supplied with your
operating system.