RIO Remote I/O System User Guide
SCO OpenServer 5 troubleshooting
Page 280
General procedure for using Port Diagnostics
To perform tests using the diagnostics facility proceed as follows;
1. Select the RTA and port you want to test using t he procedures given in Selecting the
RTA and port to test on page 281.
2. If required, perfor m the send data to port test using the procedures given in Performing
the send data to port test on page 285.
3. If required, perfor m the external loopback test using the procedures given in Performing
the loopback test on a port on page 287.