RIO Remote I/O System User Guide
Installing RIO under SCO UnixWare
Page 84
Chapter 2 Installing hardware and software
6. In the RTA Management menu, click on Configure RTA.
A prompt window is now displayed asking you for a name for the selected RTA.
7. In the prompt windo w, enter the RTA name you want (for example, Sales or Ports 1-8)
and press the Enter key.
The TTY configuration menu is now displayed.
8. In the TTY config uration menu, click on Use default TTY blocks and press the Enter
key.
You are now returned to the RTA Management menu.
9. If required, ch eck your configuration settings as follows; In the RTA Management menu,
click on View RTAsettings.
The RTA Settings window is now displayed as shown in the next picture.